Single Intelligent Relay Output Address Module FRM-1
Module Relay Notifier FRM-1
⭐Provide 5v 1 channel relay module, 2 channel 5v relay module, 12v relay module, 5v relay trigger circuit, 12 months warranty, nationwide delivery, Contact 0917.911.114
Descriptions Single Intelligent Relay Output Address Module FRM-1
The FRM-1 Address Relay Module provides the system with a dry contact output to activate a variety of auxiliary devices, such as fans, dampers, device controls, etc. Addressable dry contact is activated, either manually or through control panel programming, on a selective basis.
Feature Single Intelligent Relay Output Address Module FRM-1
• Built-in automatic type recognition identifies these devices for control panel control.
• The internal circuitry and relay are directly supported by a two-wire SLC loop.
• Built-in LED flashes green each time a communication is received the control panel and turns solid red when activated.
• Flashing LED can be unchecked globally (a ects all devices).
• High noise resistance (EMF/RFI).
• Wide viewing angle of LEDs.
• Dial directly to address 01 Row 159 for FlashScan Loop, 01 - 99 for loop CLIP mode.
• Compatible with FlashScan® and CLIP system protocols
Applications
- The FRM-1 can be programmed to operate dry contacts for applications such as door holders and air handler shutdowns.
Operations
- Each FRM-1 uses one of the 159 addressable modules on an SLC loop (99 on the CLIP Loop). It responds to regular polls the control panel and reports its type and status, including its open/normal/short state Notification device circuit (NAC). The LEDs blink with each poll received. On the command, it activates its internal forwarding.
Specifications Single Intelligent Relay Output Address Module FRM-1
- Normal operating voltage: 15 to 32 VDC.
- Maximum current draw: 6.5 mA (LED on).
- Average operating current: 230
- A live poll; Poll group 255. EOL value: Not used.
- Temperature range: 0°C to 49°C. Humidity range: 10% to 93% non-condensing.
- Current rating: Resistor 3.0 A @ 30 VDC, no encoder. - 2.0 A resistor @ 30 VDC, coded. - Resistor 0.9 A @ 110 VDC, no encoder. 0.9 A @ 125 VDC, resistor, no encoder. Inductive 0.5 A @ 30 VDC (L/R = 5 ms), coded. 1.0 A @ 30 VDC inductive (L/R = 2 ms), encoded. 0.3 A @ 125 VDC induction, (PF = 0.35), no encoder. 1.5A @ 25 VDC, inductor, (PF = 0.35), no encoder. 0.7 A @ 70.7 VDC induction, (PF = 0.35), no encoder. 2.0A @ 25 VDC, inductor, (PF = 0.35), no encoder.
- NOTE: Max (Speaker): 70.7 V RMS, 50
Video Single Intelligent Relay Output Address Module FRM-1
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Single Intelligent Relay Output Address Module FRM-1
TVAdministratorsAdministrators