Replay Notiffier Module XP6-R 6-Way
The XP6-R 6-way relay output module is a relay module circuit ,Provide relay module design, how to connect a 6-pin relay ,12 months warranty, nationwide delivery ,Contact us for a quote on injectors Vikings spinker
General description Replay Notiffier Module XP6-R 6-Way
- The Notifer six-relay control module XP6-R provides an intelligent alarm system with six Form-C relays.
- The first module is addressed 01 to 154 while the remaining modules are automatically assigned to the next higher address fve.
- Provisions are included to disable a maximum of three unused modules.
- A unique set of dry contacts is provided for each module address, which is capable of being wired for a normally open or normally closed operation.
- The module allows the control panel to pass these contacts on command. Unattended is provided for circuit control.
- Each XP6-R module has a blue LED control panel. The control board may cause LEDs to blink, latch or latch o.
- To ensure proper operation this module must be connected to a compatible Notifer fire panel. Features XP6-R 6-way relay output module • Six addressable Form-C forwarding contacts.
• Plug-in 0.75 mm2 to 1.5 mm2 detachable terminal block.
• Status indicators for each point.
• Up to three unused addresses can be disabled,
• Rotary address switch.
• FlashScan® or CLIP operation.
• Includes mounting hardware. Specifications XP6-R 6-way relay output module
- Standby current: 1.45 mA (SLC current drawing with all addresses used; if some addresses are disabled, standby current decreases).
- Alarm current: 32 mA (assuming all six relays have been turned on once and all six solid LEDs ON).
- Temperature range: 0°C to 49°C.
- Humidity: 10% to 85% not air-conditioned.
- Dimensions: 172.72 mm high x 147.32 mm wide x 25.40 mm deep.
- Measuring tape: 0.75 mm2) to 1.5 mm2.
- Maximum SLC wire resistance: 40 or 50 ohms, depends on the panel.
- Maximum IDC wire resistance: 40 ohms.
- Relay current: 30 mA/relay pulse (15.6 ms pulse duration), under panel pulse.
- Relay contact rating: 30 VDC; 70.7 VA
- Current ranking: +3.0 A @ 30 VDC max, resistor, no encoder.
+ Up to 2.0 A @ 30 VDC, resistor, encoder.
+ Up to 1.0 A @ 30 VDC, inductive (L/R = 2 ms), encoder
+ Up to 0.5 A @ 30 VDC, inductive (L/R = 5 ms), encoder
+ 0.9 A @ 110 VDC max, resistor, no encoder. 0.9 A @ 125 VAC max, resistive, no encoder.
+ 0.7 A max @ 70.7 VAC, inductive (PF = 0.35), no encoding. + 0.5 A max @ 125 VAC, inductive (PF = 0.35), no encoder.. IFrame
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Replay Notiffier Module XP6-R 6-Way
TVAdministratorsAdministrators