Module 1 Notifier M710 Input
Notifier M701 1-output module is a Notifier genuine fire alarm module
⭐ Designed for use with any NOTIFIER protocol fire alarm control panel, Includes selectable loop-out isolation in every unit. ,Provide genuine long-term warranty ,Unlimited quantity, free technical consultation
Module Description 1 Input Notifier M701
- The M700 series modules are designed for use with any NOTIFIER protocol fire alarm control panel and include selectable loop isolation in every unit.
- The M701 control module provides a single output circuit that is monitored for use with a polarized load (audio circuitry) requiring a suitable power source (7Vdc - 30Vdc) for the connected load. Alternatively, the same device can be put in unattended mode, which can then be used to control any switching loads up to 2A @ 30Vdc.
Specifications Module 1 Output Notifier M701
Size:
Height: 90 mm
Width: 92 mm
Depth: 23 mm
• Weight: 90g
• Maximum wire gauge for 1.5mm2 . terminals Power and power Module 1 output Notifier M701
• Current Consumption
- No communication 310 A @ 24 VDC;
- Communicate every 5 seconds. with LED flashing activated. 510 PhaA @ 24 VDC
- Maximum alarm current: 5 mA @ 24 VDC (each LED has LED on)
• Operating voltage: 15 to 30 VDC đỉnh peak Working Temperature Module 1 Output Notifier M701
• Operating temperature -20°C to +60°C
• Relative humidity: 0% to 95%, non-condensing
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Module 1 Notifier M710 Input
TVAdministratorsAdministrators