JSKM-CMM-9G type input and output module
JSKM CMM 9G module has the function of single input and single output channel. on it The two independent LED indicator lights can display off, flashing or constant through the controller to send command codes bright state.
The input channel monitors the passive normally open contacts and feeds their status back to the controller. output pass Output a group of normally open contacts, and monitor the output wiring and external input power. This JSKM-CMM-9G type input and output module is set to dual address when leaving the factory. If you only need to output the channel address, then short connect the T6 and T7 terminals, and then use the addresser Write address. If only the channel address needs to be input, short-circuit T3 and T4 terminals, and then use addressing device write address.
Parameter JSKM-CMM-9G type input and output module
Operating temperature range: 10°C to 55°C
Working humidity range: 5% ~ 95% R.H. relative humidity, non-condensing
Voltage range: 15~32VDC
Quiescent Current: 350μA @ 24VDC None communication
External power input voltage: rated 24VDC
External power input current: maximum 2A
Output electric shock capacity: 2A, 30VDC; 0.5A 125VAC (resistive load)
Dimensions: 124.6mm long x124.6mm Width x57.5mm height (module and embedded box and surface board mounting dimensions, see Figure 2A) Weight: 170g
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about JSKM-CMM-9G type input and output module
TVAdministratorsAdministrators