Common Area Interface Module Notifier FZM-1
Notifier address monitoring module Notifier fire alarm monitoring control module, User manual for notifier fire alarm cabinets, Latest notifier quotation, Viking sprinkler head quote, Hochiki fire alarm equipment price 2019
Common Area Interface Module
The FZM-1 Common Area Interface is an addressable module for monitoring compatible two-wire, 24-volt conventional detectors on a single circuit. It is designed for use in intelligent, addressable systems where the individual address of each module is selected using built-in rotary switches. This module allows smart panels to communicate and monitor two conventional smoke detectors. It transmits the status (normal, open or alarmed) of a full zone of common detectors back to the control panel. All two-wire detectors being monitored must be compatible with the module.
Features Common Area Interface Module Notifier FZM-1
- Supports compatible two-wire smoke detectors.
- Dial directly the address: 01 - 159 on FlashScan rings; 01 - 99 on CLIP rounds.
- LED flashes during normal operation; this is a programmable option
- Stable latch LED to indicate alarms on commands the control panel.
Notifier FZM-1 . Common Area Interface Module Specifications
- Normal operating voltage: 15 to 32 VDC
- Maximum draw: 5.1 mA (LED on)
- Average operating current: 270μA (LED flashing) EOL resistance: 3.9K Ohms
- Maximum wire resistance IDC: Supply voltage 25 OhmsIDC (between terminals T3 and T4)
- Regulated DC voltage: Limited power 24 VDC Ripple voltage: 0.1 Volts RMS max
- Current: 90mA per module
- Temperature range: 32 F to 120 F (0 C to 49 C) Humidity: 10% to 93%
- Non-condensing Dimensions: 41/2 H × 4 W × 11/4 D (Mounted to a 4 by square square using 21/8 ̋ deep box.)
- Accessories: Power box SMB500
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Common Area Interface Module Notifier FZM-1
TVAdministratorsAdministrators