Opal Opal NFXI-OPT Optical Smoke Detector

Product code : Opal NFXI-OPT

Price of the latest Opal NFXI-OPT notifier smoke detectors Supplying of fsp-851 notifier smoke detectors in unlimited quantities, Supplying notifier fire alarm catalogs, n6000 fire alarm cabinets, honeywell smoke detectors, smoke detector quotes , addressable heat detector notifier

Consulting hotline: 0944934114
Product information

Detailed description of Notifier Opal Optical Smoke Detector NFXI-OPT

The Opal NFXI-OPT Opal Optical Smoke Detector features a completely new detection chamber design, the result of years of research and development. This provides better responsiveness, reduces sensitivity changes caused by dust handling, and reduces false alarms due to insect and other debris ingress. The plug-in uses sophisticated processing circuitry that combines smoothing of the converters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software that runs complex algorithms that improve false alarm recovery and improve detection speed. The NFXI-OPT Opal has built-in short-circuit isolation and two built-in tri-color LEDs that provide a local 360-degree visual indication of the device's status. Programmed LEDs with red, amber and green static or flashing status indications are available.

Mechanical Specifications Optical Smoke Detector Opal Notifier Opal NFXI-OPT

• Height: 52mm installed in base B501AP

• Diameter: 102mm installed in base B501AP

• Weight: 97g (base inc)

• Maximum wire gauge for terminals: 2.5mm2

• Color: White • Material: PC / ABS

Electrical Specifications Optical Smoke Detector Opal Notifier Opal NFXI-OPT

• Operating voltage range: 15 to 28.5Vdc

• Max. Standby current: 200μA @ 24Vdc (no communication) / 300μA @ 24Vdc (LED on, every 5 seconds)

• Maximum continuous current: 1A (closed switch)

• Isolation current: 15mA @ 24Vdc

• Red current LED: 3.5mA @ 24VdcGreen : 7.0mA @ 24VdcYellow: 10.5mA @ 24Vdc

• Remote output voltage: 22.5Vdc

• Remote output current: 10.8mA @ 24Vdc

• Additional loop resistance: typ 80mohm @ 24V (max 170mohm @ 15V)

Notifier Opal Opal NFXI-OPT . Optical Smoke Detector Environmental Specifications

• Temperature range: -30°C to +70°C

• Humidity: Relative humidity 10 to 93% (non-condensing)

• IP Rating: IP40 when installed in B501APIP43 base when installed in WB-1AP base

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comments, reviews about Opal Opal NFXI-OPT Optical Smoke Detector
Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Bình luận sản phẩm
Write a comment
Product portfolio
0.17459 sec| 3998.961 kb