VM-DACT Dual Line Dialer Card

Manufacture: kidde

Product code: VM-DACT

The VM-DACT Dual Line Dialer Card ⭐
✅ provides dialer communications between the VM-1 control panel and remote locations over telephone lines ⭐
✅ Alarm, supervisory, and trouble information is transmitted to the remote site using one or two telephone lines in dual or split format to any desired receiver.

Product information

Voltage	24 VDC
Input power
Supervisory Active	60 mA 95 mA
Output	19.2 or 38.4 Kbps
Output current	100 mA max
Phone line	One/two loop start line on public switched telephone network, pulse, or DTMF dialing (party, ground start, and PBX lines are not acceptable.)
Moderm	V.32 bis 14.4 Kbaud
Dialer protocol	Contact ID
Wall connector	Standard RJ-31X or RJ-38X phone jack
Line supervision
Trouble Off-hook current	When on-hook line voltage < 10 V < 10 mA
Telco compliance	Communications Canada CS-03, FCC/CFR 47 Part 68
FCC registration number	EDWUSA-47115-AL-E
Operating environment
Temperature Relative humidity	32 to 120°F (0 to 49°C) 0 to 93% noncondensing