UVIR Flame Detector RFD-2FT5-I
RFD-2FT5-I is a UV/IR type flame detector. Identify fire when both UV and IR sensors simultaneously detect the presence of a flame.
Maximum 40 meters of detection range with a 90 degree cone of vision.
Permits operation at Hazardous areas.
User selectable output options among Relays, 4-20㎃ stepped output, and RS-485.
Highlights
• UV/IR Dual-sensors
• Enhanced False Alarm Immunity against sunlight and artificial false alarm sources
• Explosion-Proof and Dust Ignition proof
• Suitable for hazardous areas such as Oil, Gas stations and Petrochemical plants
Specification
• Type : Ultraviolet and Infrared, Indoor, Explosion-proof, Particulate
• Nominal sensing range : 40m
• Sensing angle : 90°, Cone type
• Operating temp. : -40 ~ +75°C
• Humidity : 0~95%
• Explosion proof :
- Ex d IIC T5/T6 IP67(KGS)
- Ex tD A21 IP67 T100°C(KGS)
• water tight : IP67(KGS)
• Output signal
- Relay
Fire : 1A ( 250VAC, 30VDC ), A connect point
Error : 1A ( 250VAC, 30VDC ), A-B connect point
- 4~20mA
- RS485
• Function
- Diagnostic sensor fault enable - Self test
- Remote self diagnostic ON/OFF control ( BIT )
[ Structure ]
• Material : Aluminum 6061
• Surface : Anodizing Process
• Color : Blue
• Weight : About 0.53kg
• External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF
[ Electrical ]
• Power Consumption : 2.0W minimum / 3.6W maximum
• Voltage : DC 24V, ( 17~32V, pulsating current available)
• Current
- Idle(Sensing) : 55mA
- Fire(Activating, Emergency)(Sensing) : 90mA
- Self test : 120mA cable recommended.
• Electromagnetic Compatibility : EMC Protected
Certificates and Documents
• ATEX Approval
• KFI Approval
• KGS Ex Approval
• KGS Dust Ex Approval
• 2FT5-I catalog
• RFD-2FT5-I Layout Drawing
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about UVIR Flame Detector RFD-2FT5-I
TVAdministratorsAdministrators