Signal Modules with class A Operation SIGA-CC2A
SIGA-CC2A Single/Dual Input Signal Modules are part of EDWARDS's Signature Series system ✔️
✅ They are intelligent analog addressable devices used for connecting, upon command the loop controller, supervised Class A or Class B signal or telephone circuits to their respective power inputs
- Module power inputs may carry 24 Vdc current to operate audible and visible signal appliances, or 25 and 70 VRMS to operate audio evacuation speakers and firefighter's telephones. The .SIGA-CC2A may be configured as a three-state four-state telephone riser selector.
- The loop controller assigns an address to the cally module automatically. No addressing switches are used. A custom address can be delivered by laptop computer.
- Diagnostic LEDs provide visible indication of the status of the module when cover plate is removed
Normal - green LED flashes
Alarm / activite - red LED flashes
The CC2A mounts in a two-gang electrical box. The MCC2A plugs a UIO motherboard. Both modules provide the same functionality.
The actual operation of the module is determined by the "personality code" selected by the installer. It is downloaded to the module the Signature loop controller during system configuration.
Standard Features
• Class A or B opertions
• Supports three-and four-state telephones
• Dual input (riser) select
- Use to connecting a 24 Vdc Monitored Audible/Visible signal circuits, or 25 and 70 VRMS Audio Evacution adn Telephone circuits to their power inputs.
• Ringtone-tone generator
- When configured for a telephone circuit, the SIGA-CC2A / MC -C2A generates its own ring-tone signal, eliminating the need for a separate ring-tone circuit.
• Plug-in (UIO) or standard 2-gang mount
- UIO versions allow quick installation where multiple modules are required. The 2-gang mount version is ideal for remote locations of require a single module.
• Automatic device map
- Signature modules transmit information to loop controller regarding their circuit locations with respect to other signature devices on the wire loop.
• Electronic addressing
- Programmable addresses are downloaded the loop controller or a laptop PC ; there are no switches or dials to set.
• Ground fault detection by address
- Detects grounding faults right down to the device level.
Application
The operation of SIGA-CC2A/MCC2A is determined by their sub-type code or “Personal Code”. The code is selected by the installer depending upon the desired application and is downloaded the loop controller. The following personality codes can be used with SIGA-CC2A / MCC2A
.png "Signal Modules with class A Operation SIGA-CC2A")
Installation
SIGA-CC2A: mounts to North American 2-1/2 inch (64 mm) deep two-gang boxes and 1-1/2 inch (38 mm) 4 inch deep. The terminals are suitable for #12 to #18 AWG (2.5 mm2 to 0.75 mm2) wire size.
Specfications
.png "Signal Modules with class A Operation SIGA-CC2A")
Ordering Information
.png "Signal Modules with class A Operation SIGA-CC2A")
Accessories
.png "Signal Modules with class A Operation SIGA-CC2A")
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Signal Modules with class A Operation SIGA-CC2A
TVAdministratorsAdministrators