Siemens FDCIO181-2 Control Module
Control module Siemens FDCIO181-2
⭐combined with Tesu pump 150 hp, flow 340 - 180 m3/h, industrial pump, large capacity, used for large-scale fire protection system, imported components, assembly in VN , Low cost , good price , Quality products , CO and CQ certified ,
- Evaluation of microprocessor control signal.
- Automatic address setting, no encoder setting or DIP switch.
- 2 monitoring inputs, 2 monitoring outputs.
- LEDs show input and output status.
- The input lines are monitored for open current or short/open circuit.
- Prevents interference through intelligent analysis of input signals.
- Monitored output lines for open current or short/open circuit (when potential output is not triggered).
- Configure output monitoring (on / off).
- Output control for device 24 VDC, max. 2 A.
- Communicate with the controller via FD18-BUS (detector line).
- Use directly in a dry area. Apply in dusty and wet areas when installed indoors in FDCH221.
- Easy-to-operate labeling method.
Voltage | 12 ... 32 VDC |
Operating current (quiescent) | 0.56 mA |
Activation current | 0.85 mA |
Output | - Capacity: 2A@ 24VDC |
- Monitoring resistor: 3.3 kΩ (1/4w) | |
Diobe :1N5404 | |
Input,Resistor | 3.3k Ω / 680 Ω |
Working temperature | 0 ... +42 °C |
Storge temperature | –20 ... +75 °C |
Humidity | ≤95 % rel |
Transmission method | FD18-BUS |
Connect the terminal | 1.0 ... 1.5 mm2 |
Color | |
Housing | white, RAL 9010 |
Cover | trong suốt |
Protection category EN60529 / IEC529/GB4208-93 | |
With FDCH221 housing | IP65 |
Please see similar products….HERE
You will receive a quote from us as soon as possible..
Have 0 comment, evaluate about Siemens FDCIO181-2 Control Module
TVAdministratorsAdministrators