The Potter pressure switch is used to detect the rise and fall of the system pressure with an automatic nozzle system. Typical applications in fire protection systems such as: dry spray system, gas - nitrogen fire extinguishing system, pressure vessel, gas supply system and water supply system. ... POTTER PRESSURE SWITCH PS40-2 1. PRODUCT INFORMATION POTTER PRESSURE SWITCH PS40-2 Pressurized connection: ” NPT . nylon material PS40-1A works when the pressure drops to 30PSI (2.1Bar) PS40-2A works when boosted to 50PSI (3.5 Bar)
Pressure adjustment range: 10-60PSI (0.7 – 4.1 Bar)
System highest pressure: 300PSI (20.68Bar)
Switch contact: normally open (NO) or normally closed (NC) 10.1 A – 125/250VAC, 2.0A – 30VDC
Operating Temperature: -40°C ~ +60°C
Dimensions: 12.1 x 5.7 x 11.1cm 2. A
DVANTAGES OF POTTER PRESSURE SWITCH PS40-2
The POTTER pressure switch offers the following advantages:
• High contact load
• Extremely short response time
• Good anti-vibration
• Long operating life
• Can be used for both liquids and gases
• Small size - Easy to fit the plate
3 . STRUCTURE OF POTTER PRESSURE SWITCH PS40-2 Structure of pressure switch ps40 POTTER Structure of pressure switch ps40 POTTER 4. INSTALLATION OF POTTER PRESSURE SWITCH PS40-2
This Potter series pressure switch must have two duct entrances one for each switch compartment separately to facilitate use. the voltage is not the same for each individual switch. The adapter cover shall be zinc die-cast for rainproofing and shall be fitted with a corrosion-resistant screw. NS Pressurized water flow converter must be suitable for indoor or outdoor service with NEMA 4/IP66 rating. Pressurized water flow adapter must be UL Ulc and CSFM listed, FM and LPC approved and NYMEA accepted.
You will receive a quote from us as soon as possible..
Have 0 comment, evaluate about POTTER PRESSURE SWITCH PS40-2
TVAdministratorsAdministrators