IR-Intelligence TM ASD-160H, Aspirating Smoke Detection System

IR-Intelligence TM ASD-160H, Aspirating Smoke Detection System

Product code: TM ASD-160H

This equipment is only to be used in accordance with this specification. Failure to operate the equipment as specified may cause damage to the unit, injury, or property damage

Product information

FEATURES

The following is a list of major features of the ASD-160H:

IR-Intelligence TM ASD-160H, Aspirating Smoke Detection System

• Patented “artificial intelligence” known as ClassiFire

• Laser Dust Discrimination (LDDTM)

• 165 feet (50m) of pipe length

• Self-adjusting between the range of 0.05% and 2.0% obscuration

• Network compatible with other AIR-Intelligence detectors and Command Module

Specifications

Specification	Value
Supply Voltage	21.6V - 26.4V DC
Size	145 W x 220 H x 90 D (mm) 5.7 W x 8.6 H x 3.5 D (in.)
Weight	3.75 lbs. (1.7 kg) with docking station
Operating temperature range	14° to 100.4°F (-10° to 38°C) (UL 268 compliance)
Operating humidity range	0 - 90% Non Condensing BS EN 61010-1 Pollution degree 1 BS EN 61010-1 Installation Cat. II
Sensitivity range (Obs/ft)	Min = 25% Max = 0.03% FSD
Maximum sensitivity resolution	0.0015 %Obs/m
Detection principle	Laser light scattering mass detection
Particle sensitivity range	0.0003m to 10m
Current consumption	250mA
Relay contact rating	500mA @ 10V Max
Maximum sampling pipe length	165 feet (50 meters) total
Sampling pipe inlets	1
Sampling pipe internal diameter	15-25mm {Adapters are required for pipes <1 inch (27mm) O.D. pipe}
Alarm levels	4 (Fire 2, Fire 1, Pre-Alarm and Aux) 1 relay as standard, others available
Chamber service intervals	Greater than 8 years (depending on environment)
Dust separator (filter) replacement intervals	Greater than 5 years (depending on environment)
Laser lifetime (MTTF)	Greater than 1000 years
Programming	Programming
Data bus cable	RS485 data cable
Data bus length	3/4 mile (1.2 km)
IP rating	IP50
SELV rating (EN 60950)	Class III