IR3 Flame Detector RFD-3FT
RFD-3FT is a Triple IR (IR3) Flame Detector.,Identify fire by analyzing the IR wavelengths of a flame., Maximum 30 meters of detection range with a 90 degree cone of vision. Permits operation at Hazardous areas. User selectable output options among Relays, 4-20
㎃ stepped output, and RS-485.
Highlights IR3 Flame Detector RFD-3FT
• Multispectrum IR sensors
• Enhanced False Alarm Immunity against sunlight and artificial false alarm sources
• Explosion-Proof and Dust Ignition proof
• Suitable for hazardous areas such as Oil, Gas stations and Petrochemical plants
Specification IR3 Flame Detector RFD-3FT
• Type : Triple Infrared, Outdoor, Non explosion-proof, Particulate
• Nominal sensing range : 30m
• Sensing angle : 90°, Cone type
• Explosion-proof class : T6,IP67,IIC(Korea Gas Safety Corporation)
• Operating temp. :-40 ~ +75°C
• Keeping temp. : -50 ~ +90°C
• Humidity : 0~95%
• Explosion proof :
-Ex d IIC T5/T6 IP67 (KGS)
-Ex tD A21 IP67 T100°C(KGS)
• water tight : IP67(KGS)
• Output signal
- RELAY
- Fire : 5A(250VAC, 30VDC), A connect point
- O.C (Open Collector)
Fire : MAX DC 32V, 10mA
Error : MAX DC 32V, 10mA
- 4~20mA
- RS485
• Function
- Diagnostic sensor fault enable - Self test
- Remote self diagnostic ON/OFF control ( BIT )
Structure IR3 Flame Detector RFD-3FT
• Material : Aluminum 6061
• Surface : Anodizing Process
• Color : Red
• Weight : About 0.53㎏
• External : 64 × 64 × 75mm, Hexahedral, Connector 1/2 inch PF
Electrical IR3 Flame Detector RFD-3FT
• Power Cunsumption : 2.0W minimum / 3.6W maximum
• Voltage : DC 24V,(17~32V, pulsating current enable)
• Current
- Idel(Sensing) : 50mA
- Fire(Activating, Emergency)(Sensing) : 70mA
- Self test : 170mA
Certificates and Documents IR3 Flame Detector RFD-3FT
• KFI Approval
• KGS Approval
• KGS Dust Ex Approval
• CE Approval
• RFD-3FT catalog
• RFD-3FT Layout Drawing
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about IR3 Flame Detector RFD-3FT
TVAdministratorsAdministrators