Intelligent Manual Pull Stations FX-278

Manufacture: kidde
Product code: FX-278

Kidde intelligent manual pull stations are engineered to deliver high-performance features ⭐
✅ superb reliability ⭐
✅ and unbeatable quality. control of ancillary equipment, to enhanced signaling functionality, these products add flexibility and powerful options to Kidde intelligent systems

Zalo

Consulting hotline: 0944934114
Product information

- Designed expressly for small buildings, Kidde pull stations are addressable modules that are uniquely identified on the system by means of familiar rotary switches. Once registered, they share data and status information that determines how the system behaves and how connected devices interact with one another.

- Kidde intelligent manual pull stations also offer contractors and installers simple setup and installation, while delivering options that take full advantage of intelligent fire alarm processing. With a microprocessor in each device, intelligence is distributed throughout the system so that command decisions are made instantly at the individual pull station, rather than bottlenecking at the control panel.

- This not only speeds event processing, it also makes a more robust and reliable system – so robust, in fact, that when upgrading a conventional panel to a Kidde intelligent system, you can usually use existing wiring – no twisted or shielded cable required!

Standard Features

• Traditional familiar appearance Single action models feature our familiar teardrop design with simple positive pull action and sturdy die-cast metal body.

• Single action (GA) and double action models Double action feature rugged Lexan housings with keyed reset.

• Break glass operation An up-front visible glass rod on the FX-270 discourages tampering.

• Intelligent device with integral microprocessor All decisions are made at the station allowing lower communication speed while substantially improving control panel response time. Less sensitive to line noise and loop wiring properties; twisted or shielded wire is not required.

• ADA Compliant Meets ADA requirements for manual pull stations.

• Rotary Addressing Familiar easy-to-set wheels.

• Diagnostic LEDs Status LEDs; flashing GREEN shows normal polling; flashing RED shows alarm state.

• Designed for high ambient temperature operation Install in ambient temperatures up to 120 °F (49 °C).

Installation

Mount in a North American 2-1/2 in. (64 mm) deep 1 gang box, or standard 4 in. square box 1-1/2 in. (38 mm) deep box with 1 gang cover

+ FX-278 Double Action Pull Station

Intelligent Manual Pull Stations FX-278

Wiring

Intelligent Manual Pull Stations FX-270

Specifications

Communication line voltage Maximum 20 V peak-to-peak
Current

Standby

Activated

350 μA

500 μA

Operating environment

Temperature

Humidity

32 to 120°F (0 to 49°C)

0 to 93% RH, noncondensing at 90°F (32°C)

Storage temperature range –4 to 140°F (–20 to 60°C)
Compatible electrical boxes North American 2-1/2 in. (64 mm) deep 1 gang box Standard 4 in. square box 1-1/2 in. (38 mm) deep box with 1 gang cover
Wire size 12, 14, 16, or 18 AWG wire (2.5, 1.5, 1.0, or 0.75 sq. mm) (Sizes 16 and 18 AWG are preferred)
Device address

01 to 64 (64 point SLC)

01 to 125 (250 point control panel)

Ordering Information

Catalog Number Description Ship Wt. lbs (kg)
FX-270 Single Action Fire Pull Station, Kidde Addressable 1 (0.5)
FX-278 Double Action Fire Pull Station, Kidde Addressable

 

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about Intelligent Manual Pull Stations FX-278

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.12911 sec| 4327.258 kb