Intelligent Manual Pull Stations FX-270
Kidde intelligent manual pull stations are engineered to deliver high-performance features ⭐
✅ superb reliability ⭐
✅ and unbeatable quality. control of ancillary equipment, to enhanced signaling functionality, these products add flexibility and powerful options to Kidde intelligent systems
- Designed expressly for small buildings, Kidde pull stations are addressable modules that are uniquely identified on the system by means of familiar rotary switches. Once registered, they share data and status information that determines how the system behaves and how connected devices interact with one another.
- Kidde intelligent manual pull stations also offer contractors and installers simple setup and installation, while delivering options that take full advantage of intelligent fire alarm processing. With a microprocessor in each device, intelligence is distributed throughout the system so that command decisions are made instantly at the individual pull station, rather than bottlenecking at the control panel.
- This not only speeds event processing, it also makes a more robust and reliable system – so robust, in fact, that when upgrading a conventional panel to a Kidde intelligent system, you can usually use existing wiring – no twisted or shielded cable required!
Standard Features
• Traditional familiar appearance Single action models feature our familiar teardrop design with simple positive pull action and sturdy die-cast metal body.
• Single action (GA) and double action models Double action feature rugged Lexan housings with keyed reset.
• Break glass operation An up-front visible glass rod on the FX-270 discourages tampering.
• Intelligent device with integral microprocessor All decisions are made at the station allowing lower communication speed while substantially improving control panel response time. Less sensitive to line noise and loop wiring properties; twisted or shielded wire is not required.
• ADA Compliant Meets ADA requirements for manual pull stations.
• Rotary Addressing Familiar easy-to-set wheels.
• Diagnostic LEDs Status LEDs; flashing GREEN shows normal polling; flashing RED shows alarm state.
• Designed for high ambient temperature operation Install in ambient temperatures up to 120 °F (49 °C).
Installation
Mount in a North American 2-1/2 in. (64 mm) deep 1 gang box, or standard 4 in. square box 1-1/2 in. (38 mm) deep box with 1 gang cover
+ FX-270 Single Action Pull Station
.png "Intelligent Manual Pull Stations FX-270")
Wiring
.png "Intelligent Manual Pull Stations FX-270")
Specifications
| Communication line voltage | Maximum 20 V peak-to-peak |
| Current | |
|
Standby Activated |
350 μA 500 μA |
| Operating environment | |
|
Temperature Humidity |
32 to 120°F (0 to 49°C) 0 to 93% RH, noncondensing at 90°F (32°C) |
| Storage temperature range | –4 to 140°F (–20 to 60°C) |
| Compatible electrical boxes | North American 2-1/2 in. (64 mm) deep 1 gang box Standard 4 in. square box 1-1/2 in. (38 mm) deep box with 1 gang cover |
| Wire size | 12, 14, 16, or 18 AWG wire (2.5, 1.5, 1.0, or 0.75 sq. mm) (Sizes 16 and 18 AWG are preferred) |
| Device address |
01 to 64 (64 point SLC) 01 to 125 (250 point control panel) |
Ordering Information
| Catalog Number | Description | Ship Wt. lbs (kg) |
| FX-270 | Single Action Fire Pull Station, Kidde Addressable | 1 (0.5) |
| FX-278 | Double Action Fire Pull Station, Kidde Addressable |
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Intelligent Manual Pull Stations FX-270
TVAdministratorsAdministrators