Inergen gas fire extinguishing system 15MPa 80L 90L
Cylinder volume :80L, 90L Capacity:16.89kg, 19kg , Extinguishing model: Enclosed Flood, Agent:IG541 (52% Nitrogen, 40% Argon, 8% Carbon Dioxide) , Work pressure Job: 15MPa , Color: Red , Contact : 0917911114
Descriptions
- Inergen gas fire extinguishing system
- IG541 mixed gas (52% nitrogen, 40% argon, 8% carbon dioxide) is a colorless, tasteless, non-toxic and non-conductive gas, pure without residue and pollution after quenching. And its ODP is zero. It is an environmentally friendly gas used for fire fighting. In addition, because of such a feature, it can be used in places where electrical fires and explosions are particularly prone.
- Combined with fire fighting equipment and electronic accessories, the whole system can be activated automatically. It can monitor the situation of the protected area through the detection devices and then it can also start the fire fighting equipment through the electromagnetic actuator automatically. So the whole system can achieve full automation. Therefore, avoiding the event of a fire occurring without anyone noticing and also saving a lot of costs of hiring workers to monitor the protected area.
- Management of multiple zones is also under the safety control of the whole system. We can use a system to protect multiple zones through distribution valves. It can make the whole system alternate targeting different protection zones. Toxic substances may be released the site of a fire. It will be very effective to put out the fire in a short time. One thing to mention is to prepare a little room to store the whole system.
Specifications
| STT | Descriptions | Specifications | |
| 1 | Pressure | 15Mpa | |
| 2 | Model | QMH15 / 80 | QMH15 / 90 |
| 3 | Mass of intake air | 16,89kg | 19kg |
| 4 | Diameter | Φ279mm | Φ325mm |
| 5 | Height | 1578 + 73mm | 1345 + 60mm |
| 6 | System activation time | ≤120 second | |
| 7 | Fill rate | 0,211kg / L | |
| 8 | Activation Power | DC24V / 1.6A | |
| 9 | Equipment nitrogen pressure | 6,0 ± 1,0Mpa (20 ℃) | |
| 10 | Temperature | 0 ~ 50 ℃ | |
| 11 | Maximum pressure | 17,2Mpa | |
| 12 | Minimum pressure | 13,6Mpa | |
Applications
- computer room, telecommunication room, transformer room, electrical switch and distribution room, generator room, tank cleaning filter, drying equipment, spray painting booth, electrical instrument room, control center, library, archive, treasure of cultural relics, etc
Advantage
- In terms of agent description, one of its advantages is that it can be used for all types of grade fires except metal fires. And it is a clean agent. There is no residue and pollution after extinguishing. - Another point is that the IG541 fire extinguishing system is specially for important assets or equipment. It will not cause damage to your property. Relatively, it is cheap and effective to be chosen as a fire extinguishing system.
- It is very effective for you to protect your property. As it is a system, it includes fire extinguishing equipment to extinguish the fire in a short time, specifically, shorter than 10 seconds. It means that all the agents will be released in such a short time. Then it will be flooded in general. In addition, it has a delay time mechanism. It is about 2 minutes. It means that when a fire occurs, there is only enough time to evacuate people the dangerous place. - It can allow multiple protected areas under the control of one system. Then it will save a lot of money for large and multiple areas.
System diagram
.png "Hệ thống chữa cháy khí Inergen 15MPa 80L 90L")
.png "Hệ thống chữa cháy khí Inergen 15MPa 80L 90L")
You can refer to similar products..HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Inergen gas fire extinguishing system 15MPa 80L 90L
TVAdministratorsAdministrators