GSA-M270 Manual Pull Stations

Manufacture: kidde
Product code: GSA-M270

The GSA-M270 ✔️
✅ series Manual Pull Stations are part of Kidde’s Signature Series system ✔️
✅ The GSA-M270 Fire Alarm Manual Pull Stations feature our very familiar teardrop shape. They are made die-cast zinc and finished with red epoxy powder-coat paint complemented by aluminum colored stripes and markings. With positive pull-lever operation, one pull on the station handle breaks the glass rod and turns in a positive alarm, ensuring protection plus fool-proof operation

Zalo

Consulting hotline: 0944934114
Product information

Standard Features

Note: Some features described here may not be supported by all control systems. Check your control panel’s Installation and Operation Guide for details.

• Traditional familiar appearance GSA-M270 models feature our familiar teardrop design with simple positive pull action and sturdy die-cast metal body.

• One stage (GA), two stage (pre-signal), and double action models GSA-M270 models are available for one or two stage alarm systems. The single stage double action GSA-M278 features a rugged Lexan housing with keyed reset mechanism.

• Break glass operation An up-front visible glass rod on the GSA-M270 discourages tampering.

• Intelligent device with integral microprocessor All decisions are made at the station allowing lower communication speed while substantially improving control panel response time. Less sensitive to line noise and loop wiring properties; twisted or shielded wire is not required.

• ADA Compliant Meets ADA requirements for manual pull stations.

• Electronic Addressing with Non-volatile memory Permanently stores programmable address, serial number, type of device, and job number. Automatically updates historic information including hours of operation, last maintenance date, number of alarms and troubles, and time and date of last alarm.

• Automatic device mapping Each station transmits wiring information to the loop controller regarding its location with respect to other devices on the circuit.

• Stand-alone operation The station inputs an alarm even if the loop controller’s polling interrogation stops.

• Diagnostic LEDs Status LEDs; flashing GREEN shows normal polling; flashing RED shows alarm state.

• Designed for high ambient temperature operation Install in ambient temperatures up to 120 °F (49 °C).

Application

The operating characteristics of the fire alarm stations are determined by their sub-type code or “Personality Code”. NORMALLYOPEN ALARM - LATCHING (Pesonality Code 1) is assigned by the factory; no user configuration is required. The device is configured for Class B IDC operation. An ALARM signal is sent to the loop controller when the station’s pull lever is operated. The alarm condition is latched at the station.

GSA-M270 Manual Pull Stations

Installation

GSA-M270 Manual Pull Stations

Specifications

Catalog Number GSA-M270 GSA-M270P, GSA-M278
Description Single Action - One Stage Single Action -Two Stage (Presignal) Double Action - One Stage
Addressing Requirements Uses 1 Module Address Uses 2 Module Addresses Uses 1 Module Address
Operating Current

Standby = 250µA

Activated = 400µA

Standby = 396µA

Activated = 680µA

Standby = 250µA

Activated = 400µA

Construction & Finish

Diecast Zinc - Red Epoxy

with aluminum markings

Lexan - Red

with white markings

Type Code Factory Set
Operating Voltage 15.2 to 19.95 Vdc (19 Vdc nominal)
Storage and Operating Environment Operating Temperature: 32ºF to 120ºF (0ºC to 49ºC) Storage Temperature: -4ºF to 140ºF (-20ºC to 60ºC) Humidity: 0 to 93% RH
LED Operation

On-board Green LED - Flashes when polled

On-board Red LED - Flashes w hen in alarm

Compatibility Use With: Signature Loop Controller
Agency Listings UL, ULC, MEA, CSFM, FM

Ordering infomation

Catalog Number Description Ship Wt. lbs (kg)
GSA-M270 One Stage Fire Alarm Station, English Markings - UL/ULC Listed 1 (0.5)
GSA-M270P Two Stage (Presignal) Fire Alarm Station, English Markings - UL/ULC Listed
GSA-M278 Double Action (One Stage) Fire Alarm Station, English Markings - UL/ULC Listed

Accessories

270-GLR 20 Glass Rods - for GSA-M270 series (USA ONLY)
276-GLR 20 Glass Rods - for GSA-M278 series

 

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about GSA-M270 Manual Pull Stations

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.13110 sec| 4327.234 kb