GSA-CC1S Synchronization Output Module

Manufacture: kidde
Product code: GSA-CC1S

✅ Synchronization Output Modules is intelligent analog addressable devices that form part of Kidde’s Signature line of products ⭐
✅ The actual operation of the GSA-CC1S is determined by the “personality code” selected by the installer, which is downloaded to the module the Signature loop controller during system configuration. Depending on their assigned personality, Synchronization Output Modules may be used as a signal power riser selector to provide synchronization of fire alarm signals across multiple zones, or for connecting, upon command the loop controller, supervised Class B signal or telephone circuits to their respective power inputs. The power inputs may be polarized 24 Vdc to operate audible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation speakers and firefighter’s telephones.


Consulting hotline: 0944934114
Product information

Standard Features

• Provides UL 1971-compliant auto-sync output for visual signals Use for connecting a supervised output circuit to a supervised 24 Vdc riser input and synchronizing multiple notification appliance circuits.

• Functions as an audible signal riser selector Use as a synch module or for connecting supervised 24 Vdc Audible/Visible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs.

• Built-in ring-tone generator When configured for telephone circuits, the GSA-CC1S generates its own ring-tone signal, eliminating the need for a separate ring-tone circuit.

• Automatic device mapping Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop.

• Electronic addressing Programmable addresses are downloaded the loop controller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set.

• Intelligent device with microprocessor All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required.


The GSA-CC1S mounts to a standard North American two-gang electrical box, making it ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.


The GSA-CC1S: mounts to North American 2-1/2 inch (64 mm) deep 2-gang boxes and 1-1/2 inch (38 mm) deep 4 inch square boxes with 2-gang covers and GSA-MP mounting plates. The terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2 ) wire size.

GSA-CC1S Synchronization Output Module

GSA-CC1S Synchronization Output Module

GSA-CC1S Synchronization Output Module


Catalog Number GSA-CC1S GSA-MCC1S
Mounting North American 2½ inch (64 mm) deep two-gang boxes and 1½ inch (38 mm) deep 4 inch square boxes with 2-gang covers and GSA-MP mounting plates Plugs UIO2R, UIO6R or UIO6 Motherboards
Description Synchronization Output Module
Type Code 50 (factory set)
Address Requirements Uses one module address
Wiring Terminations Suitable for #12 to #18 AWG (2.5 mm² to 0.75mm²
Operating Current

Standby = 223µA

Activated = 100µA

Operating Voltage 15.2 to 19.95 Vdc (19 Vdc nominal)
Output Rating

24 Vdc = 2 amps

25 V Audio = 50 watts

70 V Audio = 35 watts

Construction High Impact Engineering Polymer
Storage and Operating Environment

Operating: 32°F to 120°F (0°C to 49°C)

Storage: -4°F to 140°F (-20°C to 60°C)

Humidity: 0 to 93% RH

LED Operation Green LED - Flashes when polled Red LED - Flashes when in alarm/ active
Compatibility Use with: Signature Loop Controller
Agency Listings UL, ULC, CSFM, MEA

Ordering Information

Catalog Number Description Shipping Wt. lbs (kg)
GSA-CC1S Synchronization Output Module (Standard Mount) - UL/ULC Listed 0.5 (0.23)
GSA-MCC1S Synchronization Output Module (UIO Mount) - UL/ULC Listed 0.18 (0.08)

Related Equipment

27193-21 Surface Mount Box - Red, 2-gang 2 (1.2)
27193-26 Surface Mount Box - White, 2-gang 2 (1.2)
GSA-UIO2R Universal Input-Output Module Board w/Riser Inputs - Two Module Positions 0.32 (0.15)
GSA-UIO6R Universal Input-Output Module Board w/Riser Inputs - Six Module Positions 0.62 (0.28)
GSA-UIO6 Universal Input-Output Module Board - Six Module Positions 0.56 (0.25
235196P Bi-polar Transient Protector 0.01 (0.05)
MFC-A Multifunction Fire Cabinet - Red, supports Signature Module Mounting Plates 7.0 (3.1)
GSA-MP1 Signature Module Mounting Plate, 1 footprint 1.5 (0.70)
GSA-MP2 Signature Module Mounting Plate, 1/2 footprint 0.5 (0.23)
GSA-MP2L Signature Module Mounting Plate, 1/2 extended footprint 1.02 (0.46)


Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about GSA-CC1S Synchronization Output Module

Welcome, honored guests. Please leave a comment, we will respond soon
Sender information
Click here to rate
Sender information
Product portfolio
Online support
0.15650 sec| 4343.906 kb