Genesis LED EGC Series Ceiling Mount Notification Devices
Genesis LED EGC Series horns and LED strobes feature a sleek low profile ✔️
✅ design and energy-efficient technology that makes them less expensive to install and operate by reducing overhead. High performance LEDs require fewer power supplies, backup power, and batteries. These new appliances are designed with, energy-efficiency, and life safety in mind.
- Genesis LED EGC Series uses high efficiency optics, combined with patented electronics, to deliver a highly controlled and efficiently focused light distribution pattern in exchange for lower current requirements. Strobes feature field-selectable 15, 30,75, or 115 cd light output.
- Compared with Xenon-type strobes, Genesis LED EGC Series appliances need fewer power supplies and often smaller wire gauge, which lightens conduit requirements. They are also backwards compatible with legacy strobes, so there’s no need to replace all your existing devices to upgrade to new LED technology. In fact, EGC strobes can be mixed on the same circuit and used in the same field of view as Xenon-based strobes. This makes Genesis LED EGC Series ideal for new installations and retrofits alike.
- Field-configurable sound output levels provide the flexibility modern life safety projects demand, while the Genesis LED control protocol keeps multiple strobes on compatible NAC circuits synchronized to well within NFPA 72 requirements
- Serviceability is another area where EGC Series appliances shine. The universal room side wiring plate allows for pre-installation and electrical wiring as well as checking continuity with the included diagnostics check bar. EGC Series devices can then be easily snapped place with the confidence of knowing the wiring is correct. The innovative under-cover diagnostic test points provide easy access to device circuit testing while mounted.
Standard Features
• High Performance LED Strobe Technology
– Ultra low device current consumption allows:
– More devices per circuit
– Ability to use lower gauge wire
– Longer wire runs
– Fewer booster power supplies
– High efficiency optics
– Selectable 15, 30, 75, or 115 cd light output
– LED devices may be mixed with legacy Xenon strobes
• Efficient Audible Output
– Selectable high or low dB horn output
– Selectable temporal or steady horn output
– Improved audio frequency range for better wall penetration
• Low-profile Design
– Ultra-slim... protrudes about 1.5" the mounting surface
– Attractive appearance... no visible mounting screws
• Multiple Marking Options
– Order Red or White with or without FIRE markings
– Change markings at any time with replaceable quick-swap covers
• Easy to Install
– Pre-install and pre-wire with convenient universal room side wiring plate
– Check electrical continuity on room side wiring plate with included diagnostics check bar
– Diagnostics port streamlines device circuit testing
– Fits 1-gang, 2-gang, 4-inch octagon, and 4-inch square electrical boxes
– Optional red and white trim plates available
– Slide switches for field configuration
– 12 to 18 AWG in-out screw terminals for quick wiring
Installation
Genesis EGC horns and strobes mount to the required GP10 room side wiring plate. The GP10 mounting plate is included with the device for convenient pre-installing and pre-wiring. The device can be removed easily the room side wiring plate by pushing up with a screwdriver. The cover can also be removed the device easily with a screwdriver to access the light and sound output settings and a diagnostics test port for voltage testing
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
Genesis LED EGC Series horns, strobes, and horn-strobes mount to any standard one-gang, two-gang, 4-inch octagon, and 4-inch square electrical box. Matching optional EGCT trim rings are available to cover oversized openings. Optional color matched double-gang surface boxes are also available. Genesis LED EGC series are listed to be both wall mounted or ceiling mounted.
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
Dimensions
- EGC EGC Notification Appliances
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
- EGCT Trim Plate (optional)
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
Specifications
| Operating voltage | 16 to 33 VDC, 16 to 33 VFWR |
| Horn signal type | Constant or TC3 tempora |
| Light output | 15, 30, 75, or 115 candela |
| Strobe flash rate | 1 fps (flash per second) approx. |
| Synchronization | 20 Ω max. between any two devices. To determine allowed wire resistance, refer to these specifications, and the specifications for the synchronized signal source. |
| Synchronization Sources | Kidde CC Series Signal Modules, Booster and Auxiliary Power Supplies, Intelligent and Conventional Control Panels |
| Wire size | 12 to 18 AWG (0.75 to 2.50 mm2 |
| Dimensions (Ø × D) | 6.8 × 1.82 in. (17.27 × 4.62 cm) |
| Strobe-to-box center offset | -1.70 inches (-4.32 cm) |
| Compatible electrical boxes [1] | 1-gang, 2-gang, 4-inch octagon, 4-inch square |
| Trim plates | EGCTR, EGCTW 10.6 × 0.3 in. (26.92 × 0.76 cm) |
| Operating environment | |
|
Temperature Relative humidity |
32 to 122°F (0 to 50°C) 0 to 93% noncondensing |
| Storage Temperature | -40 to 158 F (-40 to 70 C) |
Ordering Information
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
Accessories
.png "Genesis LED EGC Series Ceiling Mount Notification Devices")
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Genesis LED EGC Series Ceiling Mount Notification Devices
TVAdministratorsAdministrators