Gasoline Fire Pump Tohatsu V52AS2
Tohatsu V52AS petrol engine fire pump is a high pressure fire pump used in civil fire protection systems for the best performance.
| Manufacturer | Tohatsu - Japan |
| Kind of engine | V52AS |
| Type of engine | Xăng |
| Enine power | 30kw |
| Capacity of pump | |
| Flow m3/h | 36-90 |
| Pressure column | 40-100 |
| Weight |
50kg |
| Dimension | |
| Pump head |
1. Technical specification:
- Dimension: D x R x C (mm) : 700 x 620 x 730
- Weight : 85kg
- Type of pump : Gasoline engine cooled
- Cylinder capacity: 617cc
- Maximum power: 30kW
- Fuel Consumption: 18l / h
- Ignition system: CD ignition and Mangeto flywheel
- Engine fuel: 30/1 viscosity petrol
- System Boot: Start threads and hands
- Lighting: 12V - 35W
- Type: single stage suction turbine pump, high pressure
- Coupling outlet: JIS-B-9912 standard
- Maximum flow: 87.6 m3 / h
- Maximum lift: 102m
- Maximum suction height: 9m
2. Advantages of Tohatsu V52AS gasoline engine fire pump
Tohatsu V52AS petrol engine fire pump is a high pressure fire pump used in civil fire protection systems for the best performance.
Lightweight and compact: The engine and pump are cast with anti-corrosion aluminum alloy to reduce weight and extend machine life. Compact machines can be moved by two firefighters
High efficiency pumping
Automatic priming primer: Rapid primer by Rotary Vane vacuum pump. Prime 3 meters in 6 seconds
Automatic carburetor
Engine coolant is recycled and rinsed out
Stainless steel fuel tank with capacity of 18 liters, ensure continuous use for 1.5 hours
The discharge port rotates 180 ° rotationally
Electric or manual start-up. Guaranteed to use under many conditions.
3. Application of Tohatsu V52AS gasoline engine fire pump
Tohatsu V52AS gasoline engine pumps are commonly used in apartment buildings, factories, schools, airports ....
4. Manual Tohatsu V52AS gasoline engine fire pump
Check before the engine explodes:
- Press the start button on the battery or hand, start by hand.
After the engine adjusts the accelerator by pressing down and rotating it clockwise to speed up a little, then stop pushing the vacuum pump lever (4) to check the vacuum pump. If the pump is self-priming, there is water out in the tube, check under the tripod on the and then pull the vacuum pump to the upper position.
- Increase the gauge until the clock gauge of the water pressure of the meter (1) reaches the required value of 5 AT, then adjust and open the water tank head full to start spraying.
Stand machine:
- Before turning off the machine must reduce the gas to the original position and then turn the switch to the left.
5. Notes on using the Tohatsu V52AS gasoline fire engine pump
- While pumping water, do not pull the vacuum pump down due to the possibility of vacuum pump failure.
- Careful inspection of oil in the oil box. Vacuum pump, lubricant is used as lubricant 40
- Regularly check the water level in the battery to the specified level.
- Mix 1 liter of lubricant plus 30 liters of gasoline before pouring the tank.
- Periodically check the condition of the machine once a week.
+ In case the machine does not explode: usually petrol
Step 1: Gasoline lock _-> Step 2: Open the spark plug -> Step 3: Remove the gasoline -> Step 4: Plug the spark plug back to normal.
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Gasoline Fire Pump Tohatsu V52AS2
TVAdministratorsAdministrators