SCS series Notifier smoke control module
SCS Series Smoke Control Module also known as SCS-8 smoke control station and optional SCE-8 smoke control extender, SCS-8L Smoke Lamp Driver and Control Expansion Unit SCE-8L smoke lamp, 12 months genuine warranty, Contact for consultation and nationwide delivery 0917.911.114
SCS-8 smoke control station and optional SCE-8 smoke control expander, SCS-8L smoke lamp driver and SCE-8L smoke control extender used with alarm control center NOTIFIER, NCA Network Control, or NCA-2 Display Unit, or INA, to provide control and status display of the fan or AHU damper. Each SCS can control and monitor eight AHU fans or dampers.
Features and Benefits
- Capable of two operating modes: Firefighter's Smoke Control Station (FSCS) or Heating, Ventilation and Air Conditioning (HVAC)
-Communication with the SCS is done via a two-wire serial interface using the EIA-485 . communication standard
- Eight independent switch groups, however, since the SCS-8L/SCE-8L is a lamp driver version of the SCS-8/SCE-8, each switch group includes contacts for connecting a switch three positions and contacts for connection of three lamps or LEDs
Specifications
- Power for the SCS is provided via a separate 24 VDC regulated power loop. If there is a power failure, a fault signal will appear on the control panel
- Each SCS has two rotary decimal switches for addressing and eight dipswitches for mode configuration
- Only one SCE can be used per SCS and up to 32 pairs can be used per NOTICE console
- System capable of controlling and monitoring 512 separate fans or AHU damper
Standard List
- UL list: file S5511
- ULC list: CS100 . file
- Approved CSFM: file 7300-0028:183 (SCS-8, SCE-8)
- MEA approved: 289-91-E8
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators