Opal Opal NFXI-SMT3 Smoke Detector, pccc hcm equipment price
Notifier Opal NFXI-SMT3 Smoke Detector Smoke detector type OPALTM SMART3 multi-criteria detection of Image, Heat and Infra Red - NFXI-SMT3, Environmentally friendly, combined with Hochiki fire alarm control cabinet
Description of Opal Opal NFXI-SMT3 . Smoke Detector
The multi-criteria, multi-sensor, photo, thermal and infrared detector (SMART3) is an eco-friendly alternative to ionization detectors. SMART3 offers a reaction rate comparable to ionization technology for fast speed and less false alarms. It can be deployed with centralization in locations where the main risk is agile development. SMART3 moves targets within target against false alarms by providing false alarm immunity. In addition to being a cost-effective alternative to ionization units, SMART3 offers better performance than alternative technologies of dual-angle or dual-wavelength optical and thermal imaging detectors. The integration of continuous monitoring for all three key elements of SMART3 allows SMART3 to respond much faster than it actually is and have the highest immunity to nuisances. Based on the sensor signals, the program automatically changes sensor threshold, sensor gain, time delay, aggregation, sampling rate, average rate and, if any sensor fails, replace Change the sensitivity of the remaining sensors as well as indicate the fault condition. of SMART3 can control the control panel to be able to change the sensitivity threshold of each component because the control panel provides the ability to customize the device to use varying the area it is protecting. The detector has built-in short-circuit isolation and two built-in tri-color LEDs provide a 360° local visual indication of device status. Programmed LEDs with red, amber and green static or flashing status indications are available.
Mechanical Specifications Opal Opal Smoke Detector Notifier NFXI-SMT3
• Height: 63mm installed in base B501AP
• Diameter: 102mm installed in base B501AP
• Weight: 102g (base inc)
• Maximum wire gauge for terminals: 2.5mm2
• Color: White
• Material: PC / ABS
Notifier Opal NFXI-SMT3 . Smoke Detector Electrical Specifications
• Operating voltage range: 15 to 28.5Vdc
• Max. Standby: 200μA @ 24Vdc (no communication) / 300μA @ 24Vdc (LED blinks, every 5 seconds)
• Max. Continuous current: 1A (close the switch)
• Isolation current: 15mA @ 24Vdc
• Red LED current: 3.5mA @ 24VdcGreen: 7.0mA @ 24VdcYellow: 10.5mA @ 24Vdc
• Remote output voltage: 22.5Vdc • Remote output current: 10.8mA @ 24Vdc
• Additional loop resistance: typ 80mohm @ 24V (max 170mohm @ 15V
Notifier Opal NFXI-SMT3 . Smoke Detector Environmental Specifications
• Temperature range: -30°C to +70°C
• Humidity: Relative humidity 10 to 93% (non-condensing)
• IP rating: IP20 when installed in base B501APIP23 when installed in base WB-1AP Sensitivity setting
TVAdministratorsAdministrators