Notifier SDX-851AUS Smart Addressable Optical Smoke Detector
Supply of optical smoke detectors with aln-v address addressable fire detector base soc-24vn , Notifier fire alarm equipment , Quotation of smoke detector notifier fsp-851, supply catalog of smoke detector notifier usually notifier ,12 month warranty, nationwide delivery with unlimited quantity
CLIP Protocol Notifer SDX-851AUS smart photoelectric smoke sensor with integrated communication provides features that surpass conventional detectors Sensor sensitivity can be programmed in the control panel software. Sensitivity is continuously monitored and reported to the dashboard. Point ID capability allows each detection address to be set with a decade of address switching, providing a location-accurate detector for selective maintenance when chamber contamination reaches an unacceptable level. The SDX-851 unique optical photoelectric sensor sensor chamber is designed to sense smoke produced by a variety of combustion sources. The SDX-851 sensor is compatible with all Notifer's smart fire alarm control cabinets (FACP). Features Smart Addressable Optical Smoke Detector Notifier SDX-851AUS
• CLIP protocol.
• Flat chamber design to reduce false alarms.
• Adjustment 1.64% to 7.71%/m occlusion.
• Good protection net to prevent insects entering.
• Sleek, low profile design.
• Address - same communication.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Dial, decimal address 1-99.
• Dual LED design provides 360° angled vision.
• LED flashes red and steady red illumination on alarm
• Remote testing the control panel
• Enable integrated function test by external magnet.
• Integrated anti-forgery feature.
• Sealed against pressure.
• Optional relays, isolators and audio bases. Notifier SDX-851AUS Smart Addressable Optical Smoke Detector Specifications
- Operating temperature: 0°C to 49°
- Relative humidity: 10% -93% without air conditioning.
- Voltage range: DC 15-32 volt peak.
- Standby current (max. avg.): 285μA @ 24VDC (one communication per second before LED flash on).
- LED Current (max): 6.5mA @ 24VDC (‘ON)
You can refer to products genuine fire alarm equipment...HERE
TVAdministratorsAdministrators