JSM-FMM-101C Micro Monitor Module
The JSM-FMM-101C miniature input module can be installed in a junction box behind the monitoring equipment Inside, this module is a light and small module, and does not require a rigid placement device during installation. This module is used for Intelligent two-wire system, the address of this module can be set through the built-in decimal code switch. This module provides a two-wire loop connection to monitor devices with normally open contacts and report back Fire alarms can also monitor safety devices with normally open contacts.
parameter JSM-FMM-101C Micro Monitor Module
-Working voltage: 15 ~ 32VDC
- Working current: 475μA
-Working temperature: -10℃ ~ 55℃
- Working humidity: no more than 95% (no condensation)
- Dimensions: 70mm (length) × 33mm (width) × 17mm (height)
characteristic JSM-FMM-101C Micro Monitor Module
◆ Noise filtering and reliable communication
◆ Loop bus power supply, no 24VDC power supply required
◆ Decimal address setting
◆ Two-color light-emitting diode
◆ Green flashes during inspection, and red is always on when alarming
TVAdministratorsAdministrators