GSA-CC1S Synchronization Output Module
GSA-CC1S ⭐
✅ Synchronization Output Modules is intelligent analog addressable devices that form part of Kidde’s Signature line of products ⭐
✅ The actual operation of the GSA-CC1S is determined by the “personality code” selected by the installer, which is downloaded to the module the Signature loop controller during system configuration. Depending on their assigned personality, Synchronization Output Modules may be used as a signal power riser selector to provide synchronization of fire alarm signals across multiple zones, or for connecting, upon command the loop controller, supervised Class B signal or telephone circuits to their respective power inputs. The power inputs may be polarized 24 Vdc to operate audible and visible signal appliances or 25 and 70 VRMS to operate audio evacuation speakers and firefighter’s telephones.
Standard Features
• Provides UL 1971-compliant auto-sync output for visual signals Use for connecting a supervised output circuit to a supervised 24 Vdc riser input and synchronizing multiple notification appliance circuits.
• Functions as an audible signal riser selector Use as a synch module or for connecting supervised 24 Vdc Audible/Visible signal circuits, or 25 and 70 VRMS Audio Evacuation and Telephone circuits to their power inputs.
• Built-in ring-tone generator When configured for telephone circuits, the GSA-CC1S generates its own ring-tone signal, eliminating the need for a separate ring-tone circuit.
• Automatic device mapping Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop.
• Electronic addressing Programmable addresses are downloaded the loop controller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set.
• Intelligent device with microprocessor All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required.
Application
The GSA-CC1S mounts to a standard North American two-gang electrical box, making it ideal for locations where only one module is required. Separate I/O and data loop connections are made to each module.
Installation
The GSA-CC1S: mounts to North American 2-1/2 inch (64 mm) deep 2-gang boxes and 1-1/2 inch (38 mm) deep 4 inch square boxes with 2-gang covers and GSA-MP mounting plates. The terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2 ) wire size.
Specifications
Catalog Number | GSA-CC1S | GSA-MCC1S |
Mounting | North American 2½ inch (64 mm) deep two-gang boxes and 1½ inch (38 mm) deep 4 inch square boxes with 2-gang covers and GSA-MP mounting plates | Plugs UIO2R, UIO6R or UIO6 Motherboards |
Description | Synchronization Output Module | |
Type Code | 50 (factory set) | |
Address Requirements | Uses one module address | |
Wiring Terminations | Suitable for #12 to #18 AWG (2.5 mm² to 0.75mm² | |
Operating Current |
Standby = 223µA Activated = 100µA |
|
Operating Voltage | 15.2 to 19.95 Vdc (19 Vdc nominal) | |
Output Rating |
24 Vdc = 2 amps 25 V Audio = 50 watts 70 V Audio = 35 watts |
|
Construction | High Impact Engineering Polymer | |
Storage and Operating Environment |
Operating: 32°F to 120°F (0°C to 49°C) Storage: -4°F to 140°F (-20°C to 60°C) Humidity: 0 to 93% RH |
|
LED Operation | Green LED - Flashes when polled Red LED - Flashes when in alarm/ active | |
Compatibility | Use with: Signature Loop Controller | |
Agency Listings | UL, ULC, CSFM, MEA |
Ordering Information
Catalog Number | Description | Shipping Wt. lbs (kg) |
GSA-CC1S | Synchronization Output Module (Standard Mount) - UL/ULC Listed | 0.5 (0.23) |
GSA-MCC1S | Synchronization Output Module (UIO Mount) - UL/ULC Listed | 0.18 (0.08) |
Related Equipment
27193-21 | Surface Mount Box - Red, 2-gang | 2 (1.2) |
27193-26 | Surface Mount Box - White, 2-gang | 2 (1.2) |
GSA-UIO2R | Universal Input-Output Module Board w/Riser Inputs - Two Module Positions | 0.32 (0.15) |
GSA-UIO6R | Universal Input-Output Module Board w/Riser Inputs - Six Module Positions | 0.62 (0.28) |
GSA-UIO6 | Universal Input-Output Module Board - Six Module Positions | 0.56 (0.25 |
235196P | Bi-polar Transient Protector | 0.01 (0.05) |
MFC-A | Multifunction Fire Cabinet - Red, supports Signature Module Mounting Plates | 7.0 (3.1) |
GSA-MP1 | Signature Module Mounting Plate, 1 footprint | 1.5 (0.70) |
GSA-MP2 | Signature Module Mounting Plate, 1/2 footprint | 0.5 (0.23) |
GSA-MP2L | Signature Module Mounting Plate, 1/2 extended footprint | 1.02 (0.46) |
TVAdministratorsAdministrators