Fire Alarm Audio Notification System ANS2 Series
The ANS series ✔️
✅ of products is a collection of high-performance audio notification systems that provide voice evacuation capability which meets the emergency voice alarm requirements of NFPA 72 for UL listed fire alarm applications ✔️
✅ ANS panels are available in 25, 50, or 100 Watt models and include a microphone, amplifier, tone generator, digital message repeater (DMR), and supervisory interface.
- These self-contained systems offer robust field-configurable features and are supported by a wide range of accessory equipment that provides application flexibility and reliable performance for new and retrofit installations alike
- Expander panels and modules extend the range of the ANS system to meet the needs of demanding audio applications. Accessory equipment such as zone switchers and remote microphones offer the sophistication of high-end systems for a relatively low cost.
- ANS systems are ideal for use with Kidde fire alarm control panels when emergency voice alarm service is required. Genesis speakers and speaker-strobes may be used with ANS audio systems to provide a clean and attractive appearance for voice audio applications.
Standard Features
• Meets NFPA 72 Emergency Voice Alarm requirements
• Easy to use custom configuration software
• Clean dead-front construction
• Integrated field recordable digital message player
• Twenty minute message capacity
• 25, 50, or 100 Watt models available
• Field selectable for either 25 or 70 Vrms speakers
• 120 VAC power supply and battery charger included
• Paging microphone overrides message and tone
• ANS25 and ANS100 systems are 520Hz compliant
• High reliability, low maintenance
• Fully supervised, UL listed
• Easy installation, operation, and configuration
• Built-in alarm and alert signals
• 24-hour backup capability
Typical Wiring
Specifications
Model | ANS25 | ANS50 | ANS100 |
Output power | 25 W | 50 W | 100 W |
Output voltage | 25 or 70 Vrms selectable | ||
Output protection | Power-limited, open and short circuit protected | ||
Input voltage | 120 Vac at 60 Hz | ||
Input current | 0.8 A @ 120 Vac | 0.5 A @ 120 Vac | 1 A @ 120 Vac |
Optional 24 Vdc input1 | |||
Standby Alarm Sine |
0.60 A 1.00 A 2.90 A |
0.60 A 1.00 A 3.40 A |
0.60 A 2.60 A 6.50 A |
Frequency response | 800 - 2800 Hz | 400 - 4000 Hz | |
Dimensions |
Rough-in: 14.5 x 18 x 4" (368 x 457 x 102 mm) Finished Door: 16.25 x 19.5" (413 x 495 mm) |
||
Battery Type | Two 12 V Gel Cell in series | ||
Battery size | |||
Minimum Maximum |
24 V, 7 Ah 24 V, 18 Ah |
24 V, 7 Ah 24 V, 18 Ah |
24 V, 7 Ah 24 V, 24 Ah |
Battery Standby Operating Time |
24-60 Hours in Standby 15 minutes in Alarm |
||
Battery Charging Current | 800 mA | ||
Battery Input current | Full speaker load, no aux load: | ||
Standby Alarm |
0.18 A 1.10 A |
0.15 A 0.80 A |
0.16 A 0.60 A |
Battery Input Current Full speaker load, full aux load of 0.5 A | |||
Standby Alarm |
1.10 A 2.50 A |
1.00 A 1.10 A |
1.10 A 2.00 A |
Ordering Information
Part Number | Description | Wt. lb (kg) |
Audio Notification Panels Audio Notification Panels include DMR, Power Supply & Battery Charger, Standard Message, Microphone, and Cabinet |
||
ANS100MDG2 | 100 Watt Audio Notification Panel. Gray Cabinet | 32 (14.5) |
ANS100MDR2 | 100 Watt Audio Notification Panel. Red Cabinet. | 32 (14.5) |
ANS25MDG2 | 25 Watt Audio Notification Panel. Gray Cabinet. | 29 (13.2) |
ANS25MDR2 | 25 Watt Audio Notification Panel. Red Cabinet. | 29 (13.2) |
ANS50MDG2 | 50 Watt Audio Notification Panel. Gray Cabinet. | 32 (14.5) |
ANS50MDR2 | 50 Watt Audio Notification Panel. Red Cabinet. | 32 (14.5 |
TVAdministratorsAdministrators