VK2523 Viking Horizontal Sprinkler
Catalog tyco sprinkler heads Horizontal Directional Nozzles - Dry Nozzle - Standard Response Hazardous Normal - K = 8.0 Prestige Quality 12 months warranty Contact pcccdongnam.vn
VK2523 Viking Non-horizontal Sprinkler Head Normal risk heat sensitive sprinkler suitable for use in frozen areas. The nozzles are designed for dry systems and containment systems, where it is necessary to prevent water or condensation entering the drop nipple prior to sprinkler operation.
The VK2523 can also be installed in frozen spaces and powered a wet system in an adjacent hot area. Large orifice dry sprinklers allow greater flow at lower pressures than standard orifice sprinklers. The new deflector is carried and the approval is extended for installations 4 to 12 12 below the ceiling. Standard Response Normal Horizontal Dry Hazard Horizontal sprinklers are available in different finishes and temperature ratings to meet design requirements. Special coatings of Polyester and Electroless Nickel (ENT) have been studied for installation in corrosive environments and are listed by cULus as corrosion resistant as outlined in the Approval Chart.
Technical detail description VK2523 Viking Horizontal Sprinkler Heads
- Minimum operating pressure: 7 PSI (0.5 bar)
- Maximum working pressure: 175 PSI (12 bar). Factory hydrostatically tested to 500 psi (34.5 bar) Thread size: 1 NPT or 25 mm
- BSPNominal K-Factor: 8.0 U.S (115.2 metric ) for lengths up to 48 punches.
The K-factor measurement shown is when the pressure is measured in bars. When the pressure is measured in kPa, divide the K-factor by the factor displayed by 10.0.
- Bulb liquid temperature rated as -65°F (-55°C) Covered by US patent numbers: 8,636,075 and 8,376,060
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about VK2523 Viking Horizontal Sprinkler
TVAdministratorsAdministrators