Single Viking Foam Pump System
Single Viking Foam Pump system is a control system for a foam fire extinguishing system
✅ Imported the US, UL / FM standard
✅ Genuine warranty for 12 months
✅ Commitment to supply unlimited quantities ⭐
✅ Contact us now: 0917.911.114
Detailed description of the single Viking Foam Pump System
The Viking Single Foam Pump System incorporates a copper/stainless steel positive displacement foam pump that is UL listed and capable of dry operation. Balance valves, pressure relief valves, and piping products are all in copper or 316 stainless steel as standard materials. One NEMA 2/Approved/FM listed NEMA 2 foam pump controller, mounted and wired on the FoamPak, is included.
Single Viking Foam Pump System, is a complete foam pump system, equipped with supply and discharge piping (not including foam supply line and foam return line to foam tank), auxiliary discharge connections , centralized discharge check valve, pressure maintenance valve, pressure relief valve, centralized supply filter, foam pump and pump controller. Rotary gear pumps are made of copper to withstand the corrosive atmospheres that exist with AFFF and AR-AFFF concentrates. The pump's unique lip-sealing structure allows it to run dry without damaging the pump. Viking FoamPak will be used wherever a foam system using a positive pressure ratio (Viking ILBP) is desired or necessary. Viking FoamPak can provide one or more foam systems with balanced pressure ratios.
Applications of Viking Single Foam Pump System
Viking Single Foam Pump Systems are centralized foam dispensers. Viking FoamPak foam systems are an important part of low or high expansion foam systems, covering the following applications: hangars, petrochemical facilities, flammable and combustible liquid storage, farms tanks, facilities for storing large quantities of flammable or combustible liquids, off-shore FPSO and shipboard applications and many military installations. The Viking Single Foam Pump System can provide concentrated foam to concentrate spray lines running above or below ground level.
Single Viking Foam Pump System Options
Viking Single Foam Pump Systems are available in five basic sizes, available with four standard foam discharge pressure ratings, 100, 150, 200, 261 psi, (6.9, 10.3, 13.8) , 18 bars). The FoamPak assembly flow rate capacity is selected based on the required flow rate per minute of foam concentrate and the foam injection rate required for all special flammable liquid hazards. The standard method for sizing the capacity of a FoamPak is to multiply the area of the hazard by the required density, multiply that sum by the concentration of foam concentrate (1%, 2%, 3%), multiply that sum by the system. Safety number 1.15% for hydraulic discharge and hydraulic balance of the piping system. If the hazard required flow rate is known, it means that hydraulic calculations for the hazard have been made, multiply the total water flow by the percentage of foam used. The FoamPak assembly pressure rating was chosen after considering the differential pressure requirements of the ILBP, (Viking ILBP requires a minimum pressure differential of 15 psi (1 Bar)), added to the water pressure. Static available at riser. The pressure rating of the FoamPak shall be determined by adding to the pressure drop of the concentrator discharge line attributed to the length of the concentrate line the FoamPak discharge connection to the furthest ILBP. The system's typical pressure rating should exceed the remaining water pressure to the furthest rise of 15 to 30 psi (1 to 2 Bar). You should choose the next highest pressure rated pump.
Controller structure Viking Foam Pump system single form
The foam controller is designed specifically for the foaming service and has alarms and functions as standard:
• Phase reverse alarm / phase alarm
• Timer to run, set in 10 minutes
• Manual shutdown only, emergency start button
• Connecting remote boot terminal
• Deluge system boot contact
• Remote pump operation contact
• Remote power failure contact
• Spare contacts for additional pump wiring
• Configured for an optional anti-pressure switch, supplied by the contractor or by special order Viking
• Clear alarm - low concentration
• Standard NEMA 2 enclosure - options for Nema 3R, Nema 4 and Nema 4X
• Foam pressure switch for automatic pressure loss start Typical options that can be added to the above at additional cost are:
• Anti-condensation space heaters for 120 volts or 240 volts, both phases
• Foam pressure switch for automatic pressure loss start
• Automatically switch to another power source
• Pump visible and visible on remote alarm/local light contact Standard Viking Single Foam Pump System
- UL Listed: Category EX27020
- FM Approved:Pump type, foam concentrate and water or high pressure water Spr
- ISO Approved to 9001:2015
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Single Viking Foam Pump System
TVAdministratorsAdministrators