OSID-EHI and OSID-EHE, Outdoor Protector Box
Custom designed IP 66 NEMA 4-4X environmental and protective enclosures protect OSID imaginators and emitters dust and water ingress in industrial environments , Cases are intended for use with 1-on systems only first.
- The enameled housings are made of ABS plastic. Glass windows cause minimal attenuation of UV and IR rays. Installation and servicing is extremely easy. The box has two routes for easy wiring. The Emitter Case can be used with both a battery-powered transmitter and a 24V wired transmitter. To access the ImTD FTDI socket, the cover needs to be removed. A separate cable input just below the FTDI socket is normally sealed but can be retrofitted with a gland supplied with the housing for maintenance or image upgrades.
- Both the imaging housing and the transmitter have 3 pre-drilled screw connections for fixture mounting. The image has an additional glass window on the bottom of the case to allow the Alarm and Fault LEDs to be seen below. Where condensation is expected, both enclosures can be fitted internally with a minimum 10W heater.
- IP66, NEMA 4-4X for use in harsh environments
- Open image additional view for alarm and fault LEDS
- Dedicated entrance for OSP-001 FTDI . cable
- Quick and easy installation
- opening and exiting for wiring
- Protection against dust and water
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about OSID-EHI and OSID-EHE, Outdoor Protector Box
TVAdministratorsAdministrators