Conventional AUTOPULSE Z-10 fire control detection panel
AUTOPULSE Z-10 is a 24/7 automatic fire suppression system detection, control and release board ⭐
✅ Detection functions include smoke, heat and fire detection
✅ Process control panel detect signal protected areas and immediately perform key operations including sounding alarms, shutting down equipment and releasing fire suppression systems. Accessories include smoke detectors /heat/flame, manual pull station, whistle, wardrobe, bell, cancel switch, maintenance switch, etc.
The AUTOPULSE fire detection, control and suppression system panel provides 24/7 automatic fire protection.
.png "Bảng điều khiển phát hiện kiểm soát cháy AUTOPULSE Z-10 thông thường")
- The AUTOPULSE Z-10 control panel offers common fire alarm control circuits and is equipped with features needed for a wide variety of single or dual hazard release applications. Capabilities include automatic extinguishing, and sprinkler control and fire suppression system control.
- The 542DC and 542DE and 542RC and 542RE boards are compatible with system sensor i3 probes, conventional smoke detectors that can transmit a maintenance trouble signal to the control panel for a 'freeze' signal monitor when the ambient temperature drops below the detector rating by approximately 45°F (7°C). In addition, they are compatible with various common input devices. The AUTOPULSE 542D (C) and 542D (E) are six-zone Pre-Action and Deluge control panels for deluge and pre-action applications. The panels provide reliable detection, signaling and fire protection for commercial, industrial and institutional buildings that require water-based clearances. AUTOPULSE 542D (E) allows connection to 220/240 VAC.
- AUTOPULSE 542R (C) and 542R (E) are 6-zone control panels. The panels provide reliable detection, signaling and fire protection for commercial, industrial and institutional buildings that require regionally based release. The AUTOPULSE 542R(E) release control panel allows connection to 220/240 VAC.
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Conventional AUTOPULSE Z-10 fire control detection panel
TVAdministratorsAdministrators