- Integrated circuit indicators: Each circuit is equipped with monitoring functions for fire, circuit break and short circuit, respectively. - Digital fault detection for voltage source: Whenever the system detects a voltage fault, an error alarm will sound and the indicator light will be on
- Two-stage alarm delay function to prevent false alarms: When the detector fires for the first time, the system automatically resets the detector. If another signal is received within a short time
- Auto reset mode
- Digital electronic switch is used for dustproof and long life
- Multiple zone circuit configurations available: 1L, 2L, 4L, 5L, 8L
- Housed in ABS . fireproof enclosure
Specifications
Model | CM-EP3 |
Volt | 240V AC 50/60 Hz ± 10% |
Pin standard | Pin 24 V DC / Axit chì (Không tràn) |
E.O.L RESISTOR | 10 KΩ |
EXTERNAL CIRCUIT | < 50 |
NO. OF BELLS | 1 time of panel circuits |
Battery voltage | DC 26V, less than 450mA, trickle charge |
voltage | Short circuit voltage 24 V DC less than 32mA |
DETECTORS | Unlimited for ROR Heat or Fixed Temp. Heat detectors & up to 20 Photoelectric smoke detectors (probe standby current: 24V DC 40 μA below) |
NO. OF INDICATORS | 1 time of panels circuits |
Structor | Non-flammable ABS plastic |
Mã KT | 1L / 2L / 4L / 5L / 8L |
Contact | Normally voltage unopened contacts; Capacity 250V AC 7A |
Size | 260 × 330 × 96 (mm) |
Order informations
CM-EP3-1L | FACP 01 battery area |
CM-EP3-2L | FACP 02 battery area |
CM-EP3-4L | FACP 04 battery area |
CM-EP3-8L | FACP 08 battery area |
You can refer to products genuine fire alarm equipment...HERE
You will receive a quote from us as soon as possible..
Have 0 comment, evaluate about Chungmei CM-EP3 CM-EP3
TVAdministratorsAdministrators