Wall Model LED Strobes and Horns Genesis GL Series
Innovative LED technology allows the new Genesis GL Series horns and LED strobes a more energy-efficient and sleek lowprofile design compared to previous Genesis models making them less expensive to install and operate by reducing overhead, and requiring fewer power supplies, backup power and batteries. These new appliances are designed with performance ✔️
✅ energyefficiency, and life safety in mind. About the size of a deck of playing cards ✔️
✅ Genesis GL strobes do not require bulky specular reflectors to maximize output. Instead, high efficiency optics, combined with patented electronics, deliver highly-controlled and uniform light distribution pattern in exchange for lower current requirements. These devices are designed to improve efficiency by reducing overhead — requiring fewer power supplies and often smaller wire gauge. This makes them ideal for any installation that calls for high efficiency and clean modern design appeal. Serviceability is another area where GL Series appliances shine. Field configurable light and sound output levels provide the flexibility modern life safety projects demand, while the Genesis control and synchronization protocol keeps multiple strobes on compatible NAC circuits synchronized.
Standard Features
• LED technology – More energy efficient – High efficiency optics
• Low-profile design – Compact design... single gang mounting – Ultra-slim... protrudes about one inch mounting surface – Attractive appearance... no visible mounting screws
• Field-configurable visible and audible settings – Selectable 15, 30, 75, or 110 cd strobe output – Selectable high (default) or low dB horn output – Selectable temporal (default) or steady horn output
• Easy to install – Fits standard 1-gang electrical boxes – no trim plate needed – Optional trim plate for 4-inch square boxes – Slide switches for field configuration – 12 to 18 AWG in-out screw terminals for quick wiring
• High performance standards for demanding applications – UL 1971 standards – No synch modules needed – RoHS (Restriction of Hazardous Substances) compliant – UL/ULC/CSFM/FCC approved
Application
- Strobes
Genesis GL Series strobes are UL 1971-listed for use indoors as wall-mounted public-mode notification appliances for the hearing impaired. Prevailing codes require strobes to be used where ambient noise conditions exceed 105 dBA (87 dBA in Canada), where occupants use hearing protection, and in areas of public accommodation as defined in the Americans with Disabilities Act.
All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. Synchronization is important in order to avoid epileptic sensitivity. See the specifications table for a list of compatible sources.
- Horns
Genesis horn output reaches as high as 95 dBA-fast and features a unique multiple frequency tone that results in excellent sound penetration and an unmistakable warning of danger. Horns may be configured for either coded or noncoded notification appliance circuits. They can also be set for low dBA-fast output. This setting reduces horn output by about 5 dBA-fast. Horn-only models may be ceiling-mounted or wall-mounted.
The suggested sound pressure level for each signaling zone used with alarm signals is at least 15 dBA-fast above the average ambient sound level, or 5 dBA-fast above the maximum sound level having a duration of at least 60 seconds, whichever is greater. These are measured at five feet (1.5 m) above the floor. The average ambient sound level is A-weighted, fast response sound pressure measured over a 24-hour period.
Doubling the distance the signal to the ear will theoretically result in a 6 dBA-fast reduction of the received sound pressure level. The actual effect depends on the acoustic properties of materials in the space. A 3 dBA-fast difference represents a barely noticeable change in volume.
Light Output
Sound Output
Horns & Horn-Strobes at 24 V | ||||
Output mode | dB Setting | 16.0 V | 24.0 V | 33.0 V |
Continuous Horn | High | 80 | 83 | 86 |
Low | 78 | 81 | 81 | |
Temporal Horn | High | 76 | 79 | 81 |
Low | 75 | 77 | 77 |
Dimensions
Specifications
Material | Red or white textured UV stabilized, colored impregnated engineered plastic. Exceeds 94V-0 UL flammability rating |
Weight | 0.35 lbs |
Lens | Lexan |
Dimensions |
Appliance: 4.53" H x 2.76" W x 1.27" D (115 mm x 70 mm x 32 mm). Trimplate: 5.25" H x 4.58" W x 0.32" D (133 mm x 116 mm x 8 mm). |
Operating Temperature | Indoor: 33.8 °F to 120.2 °F (1 °C to 49 °C) and maximum humidity of 93% |
Mounting (indoor only) |
Strobes and horn-strobes are for wall-mount installation only. Horn-only models may be ceiling- or wall-mounted. Flush mount: 2-1/2 inch (64 mm) deep one-gang box. Surface mount: Model GL1xN-BB1G surface mount box, wiremold box, or equivalent surface-mount box. With optional GL1xN-TP trim plate: One-gang or four-inch square box |
Wire Connections | 12 to 18 AWG (0.75 to 2.5 mm² |
Operating Voltage | 24 VDC: 16 to 33 VDC |
Strobe Output Rating | Selectable 15, 30, 75, 110 candela output (UL 1971 and ULC S526) |
Strobe Flash Rate | Strobes are designed to flash at 1 flash per second |
Synchronization Sources |
FACPs: VM and VS Series life safety systems, FX Series fire alarm control panels. Moduels: GSA-CC1S, GSA-MCC1S, SIGA-CC2A, GSA-MCC2A, EG1M-RM. Power supplies: MIRBPS6A, MIRBPS10A, APS6A, APS10A. |
Horn Pulse Rate | Selectable Continuous or Temporal Code 3 Horn tone: The temporal pattern (1/2 second on, 1/2 second off, 1/2 second on, 1/2 second off, 1/2 second on, 1-1/2 seconds off and repeat) is specified by ANSI and NFPA 72 for standard emergency evacuation signaling. |
Ordering Information
Model | Housing | Marking | Lens | Strobe | Horn |
Ship Wt. lb. (kg) |
Fire Alarm Appliances | ||||||
GL1RF-HD | Red | FIRE | N/A | Horn only | Temporal or Steady, High or Low dB | 0.25 (0.11) |
GL1RF-HDVMC | Red | FIRE | Clear | Selectable 15, 30, 75, or 110 cd | Temporal or Steady, High or Low dB | |
GL1RF-VMC | Red | FIRE | Clear | Selectable 15, 30, 75, or 110 cd | Strobe only | |
GL1RN-HD | Red | None | N/A | Horn only | Temporal or Steady, High or Low dB | |
GL1RN-HDVMC | Red | None | Clear | Selectable 15, 30, 75, or 110 cd | Temporal or Steady, High or Low dB | |
GL1RN-VMC | Red | None | Clear | Selectable 15, 30, 75, or 110 cd | Strobe only | |
GL1WF-HD | White | FIRE | N/A | Horn only | Temporal or Steady, High or Low dB | |
GL1WF-HDVMC | White | FIRE | Clear | Selectable 15, 30, 75, or 110 cd | Temporal or Steady, High or Low dB | |
GL1WF-VMC | White | FIRE | Clear | Selectable 15, 30, 75, or 110 cd | Strobe only | |
GL1WN-HD | White | None | N/A | Horn only | Temporal or Steady, High or Low dB | |
GL1WN-HDVMC | White | None | Clear | Selectable 15, 30, 75, or 110 cd | Temporal or Steady, High or Low dB | |
GL1WN-VMC | White | None | Clear | Selectable 15, 30, 75, or 110 cd | Strobe only |
TVAdministratorsAdministrators