UVIR Flame Detector RFD-2TN
RFD-2TN is a UV/IR type flame detector. Identify fire when both UV and IR sensors simultaneously detect the presence of a flame.
Maximum 30 meters of detection range with a100 degree cone of vision.
User selectable output options among Relays, 4-20㎃ stepped output, and RS-485.
Highlights
• UV/IR Dual-sensors
• Wide field of view
• Enhanced False Alarm Immunity against sunlight and artificial false alarm sources
• Suitable for general areas such as gymnasium, commercial facilities, and cultural heritage
[ Specification ]
• Type : Ultraviolet and Infrared, Non Explosion-proof
• Nominal sensing range : 30m
• Sensing angle : 100°, Cone type
• Operating temp. :-40~+75℃
• Humidity : 0~95%
• Output signal
- RELAY
- Fire : 1A(250VAC, 30VDC), A-B connect point
- Error : 1A ( 250VAC, 30VDC ), A-B connect point
- 4~20mA
- RS485
• Function
- Diagnostic sensor fault enable - Self test
- Remote self diagnostic ON/OFF control ( BIT )
[ Structure ]
• Material : Anodizing
• Surface : Powder Coating
• Color : Gold
• Weight : About 0.53㎏
• External : 64mm × 75mm, Hexahedral, Connector 1/2 inch PF
[ Electrical ]
• Power Consumption : 2.0W minimum / 3.6W maximum
• Voltage : DC 24V, ( 17~32V, pulsating current enable)
• Current
- Idel(Sensing) : 55mA
- Fire(Activating, Emergency)(Sensing) : 90mA
- Self test : 180mA
Certificates and Documents
• KFI Approval
• RFD-2TN catalog
• RFD-2TN Layout Drawing
TVAdministratorsAdministrators