Universal Class A B Module GSA-MAB
The GSA-MAB is Universal Class A/B Modules ⭐
✅ They are intelligent analog Addressable devices that are part of Kidde’s Signature Series system ⭐
✅ The actual function of the module is determined by the “personality code” selected by the installer. This is downloaded to the module the Signature loop controller during system configuration. The GSA-UM and GSA-MAB gather analog information the slave devices connected to them and convert this digital signals. Each module’s on-board microprocessor measures and analyzes the signal and decides whether or not to input an alarm.
The GSA-MAB is part of the UIO family of plug-in Signature Series modules. It takes advantage of the modular flexibility and easy installation that characterizes all UIO modules. Two- and sixmodule UIO motherboards are available. These can accommodate individual risers for each on-board module, or shared risers in any combination with their UIO modules. All wiring connections are made to terminal blocks on the motherboard. UIO assemblies may be mounted in Kidde enclosures. The GSA-MAB may be used to connect any one of the following:
• one Class B or one Class A Initiating Device Circuit
• one Class A or B circuit for 2-wire Smoke Detectors
• one Class A or B Notification Appliance Circuit
Standard Features
• 15 modules in one
- Multiple applications including Class A or B device circuit wiring, Class A or B 2-wire smoke detector circuits and delayed latching (retard) for waterflow alarm applications. The installer selects one of up to 15 “personality codes” to be downloaded the loop controller.
• Plug in (UIO) or standard 2-gang mount
- UIO versions allow quick installation where multiple modules are required. The 2-gang mount version is ideal for remote locations that require a single module.
• Automatic device mapping
- Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop.
• Electronic addressing
- Programmable addresses are downloaded the loop controller, a PC, or the SIGA-PRO Signature Program/Service Tool. There are no switches or dials to set.
• Intelligent device with microprocessor
- All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required.
• Non-volatile memory
- Permanently stores serial number, type of device, and job number. Automatically updates historic information including hours of operation, last maintenanc e date, number of alarms and troubles, and time and date of last alarm.
• Stand-alone operation
- The module makes decisions and inputs an alarm initiating devices connected to it even if the loop controller’s polling interrogation stops. Function availability dependant upon control panel.
• Ground fault detection by address Detects ground faults right down to the device level.
• High ambient temperature operation
- Install in ambient temperatures up to 120oF (49oC).
• Designed to ISO 9001 standards
- All Signature products are manufactured to strict international quality standards to ensure highest reliability.
Installation
GSA-MAB: mount the UIO motherboard inside a suitable Kidde enclosure with screws and washers provided. Plug the module any available position on the motherboard and secure the module to the motherboard with the captive screws. Wiring connections are made to the terminals on the motherboard (see wiring diagram). UIO motherboard terminals are suited for #12 to #18 AWG (2.5 mm2 to 0.75 mm2 ) wire size.
Typical Wiring (GSA-MAB)
Specifications
Model | GSA-UM | GSA-MAB |
Description | Standard Mount Universal A/B Module | Plug-in (UIO) Universal A/B Module |
Wiring Terminations | Suitable for #12 to #18 AWG (2.5 mm² to 0.75mm² | |
Mounting | North American 2½ inch (64 mm) deep 2-gang boxes & 1½inch (38 mm) deep 4 inch square boxes with twogang covers and GSA-MP mounting plates | Plugs UIO2R, UIO6R or UIO6 Motherboards |
Personality Codes | 15 Selectable Codes Available | 14 Selectable Codes Available |
Address Requirements | Uses Two Module Addresses | |
Operating Current | See Operating Characteristics Table | |
Operating Voltage | 15.2 to 19.95 Vdc (19 Vdc nominal) | |
Construction | High Impact Engineering Polymer | |
Storage and Operating Environment | Operating Temperature: 32°F to 120°F (0°C to 49°C) Storage Temperature: -4°F to 140°F (-20°C to 60°C) Humidity: 0 to 93% RH | |
LED Operation | On-board Green LED - Flashes when polled; On-board Red LED - Flashes when in alarm/active | |
Compatibility | Use With: Signature Loop Controller | |
Agency Listings | UL, ULC, MEA, CSFM |
Ordering Information
Catalog Number | Description | Ship Wt. lb (kg) |
GSA-UM | Universal Class A/B Module (Standard Mount) - UL/ULC Listed | 0.5 (0.23) |
GSA-MAB | Universal Class A/B Module (Plug-in) - UL/ULC Listed | 0.18 (0.08) |
TVAdministratorsAdministrators