Relay Detector Base KI-RB and KI-RB4

Product code : KI-RB and KI-RB4

This base includes a relay ✔️
✅ Normally Open or Normally Closed operation is selected during installation ✔️
✅ The dry contact is rated for 1 amp (pilot duty) @ 30 Vdc. The relay’s position is supervised to avoid accidentally jarring it out of position ✔️
✅ The KI-RB can be operated as a control relay if programmed to do so at the control panel. The relay base does not support the GSA-LED Remote LED.

Product information

Dimensions

Specifications

Operating voltage	15.20 to 19.95 VDC
Normal operating current	51 µA
Alarm current	68 µA
Smoke Sensitivity Range	UL/ULC: 0.53 to 3.94 %/ft. (1.7 to 12.35 %/m) obscuration
Vibration level	10 to 35 Hz, with an amplitude of 0.01 in.10 to 35 Hz, with an amplitude of 0.01 in.
Air velocity	0 to 4,000 ft./min (0 to 20 m/s)
Wall mounting	12 in. (305 mm) max. ceiling
Compatible bases	See Ordering Information
Compatible detector testers	Testifire 1000, Testifire 2000
Operating environment	32 to 120°F (0 to 49°C), 0 to 93% RH, noncondensing
Construction	High Impact Engineering Polymer, White
Storage temperature	-4 to 140°F (-20 to 60°C)
Environmental compensation	Automatic
Agency Listings	CAN/ULC-S529, UL 268, UL 268A

Accessories

KI-SB	Detector Mounting Base - Standard	0.2 (.09)
KI-SB4	4-inch Detector Mounting Base c/w Trim Skirt
KI-RB	Detector Mounting Base w/Relay
KI-RB4	4-inch Detector Mounting Base w/Relay, c/w Trim Skirt
KI-IB	Detector Mounting Base w/Fault Isolator
KI-IB4	4-inch Detector Mounting Base w/ Fault Isolator, c/w Trim Skirt
GSA-LED	Remote Alarm LED (not for EN54 applications)
KI-ABST	Audible (Sounder) Base for Fire Detectors	0.3 (0.15)
KI-ABLT	Low Frequency Audible (Sounder) Base for CO and Fire Detectors	0.3 (0.15)
KI-ABDT	Audible (Sounder) Base for CO and Fire Detectors	0.3 (0.15)
GSA-TS4	Trim Skirt (supplied with 4-inch bases)	0.1 (0.04)
GSA-TS	Trim Skirt - (optional for non 4-inch bases)	0.1 (0.04)
GSA-DMP	Detector Mounting Plate	3.0 (1.4)