Intelligent Fire Alarm Systems FX-1000
The FX-1000 ✔️
✅provides one Class A or Class B intelligent device loop that supports up to 250 device addresses ✔️
✅ Loop controller modules may be added in combination to expand total system capacity in 250-point increments to up to 1,000 device addresses. The FX-1000 panel includes four NACs that may be wired for either Class A or Class B operation.
- Kidde brand intelligent life safety systems offer the power of highend intelligent processing in configurations that deliver uncomplicated solutions for small to mid-sized applications. With intelligent detection, rotary addressing, automatic device mapping, optional Ethernet® connectivity, and a full line of easily-configured option cards and modules, these flexible systems offers offer versatility that benefits building owners and contractors alike
Features
• Auto-programming speeds installation time
• Form C contacts for alarm and trouble, Form A for supervisory
• Easy-to-configure rotary addressing
• Optional Ethernet port for diagnostics, programming and a variety of system reports
• Two programmable switches with LEDs and custom labeling
• Supports horn silence over two wires, and UL 1971-compliant strobe synchronization
• Class B or Class A wiring
• Ground fault detection by module
• Supports up to eight serial annunciators, (LCD, LED-only, and graphic interface)
• Can use existing wiring for most retrofit applications
• Upload/download remotely or locally
• Two-level maintenance alert reporting
• Pre-alarm and alarm verification by point
• Adjustable detector sensitivity
• 4 x 20 character backlit LCD display
• Optional earthquake hardening: seismic Importance Factor 1.5
• Standalone operation
• Transmission test frequency by hour
Application
Kidde FX Series life safety systems are powerful intelligent solutions for small to mid-sized buildings. Advanced analog technology delivers the benefits of flexible system installation, while clean and easy-to-operate user interfaces make panel operation and system maintenance quick and intuitive.
Dimensions
System Layout
Panel Layout
1 Transformer
2 Main AC wiring block & fuse holder
3 RS-232 card connector (J3)
4 Dialer card connection (J8)
5 Ethernet card connector (J1)
6 Main circuit board
7 Panel backbox enclosure
8 Operator interface
9 SLC card connector (J7)
10 Class A card connector (J2)
11 Tie wrap mounts
12 LED expander connector (J6)
13 Standby batteries
Specifications
Model | FX-64 | FX-1000 |
Device loops |
1 loop Class B or Class A (Styles 4, 6, 7) supporting up to 64 device addresses (any combination of detectors and modules) Maximum T-taps: 63 (each device can be on its own branch) |
1 loop, expandable to 4, Class A or B (Styles 4, 6, 7), each loop supporting up to 250 device addresses (125 detectors and 125 modules max.). Addresses 1 to 125 are for detectors and addresses 126 to 250 are for modules Maximum T-taps/loop: 124 |
Notification appliance circuits |
2 Class B (Style Y), Class A (Style Z) optional 3.75 A FWR total at 120/230 VAC 60 Hz 3.0 A FWR total at 230 VAC 50 Hz 2.5 A FWR each max. per circuit |
4 Class B (Style Y) or 2 Class A (Style Z) 6.0 A FWR total at 120/230 VAC 60 Hz
5.0 A FWR total at 230 VAC 50 Hz 2.5 A FWR each max. per circuit |
Primary power |
120 VAC, 60 Hz, 1.3 A max. 230 VAC, 50-60 Hz, 0.62 A max. |
120 VAC, 60 Hz, 2.0 A max. 230 VAC, 50-60 Hz, 0.97 A max |
Base panel current standby | 155 mA | 172 mA |
Base panel current alarm | 204 mA | 267 mA |
Input zones | 16 max. | 32 max. |
Remote annunciator |
8 drops max., RS-485 Class B, Class A is optional Data line length: 4,000 ft. (1,219 m) |
8 drops max., RS-485 Class A or B Data line length: 4,000 ft. (1,219 m) |
Operating voltage | 24 VDC pane | |
Auxiliary power output circuit |
Aux power 1: 500 mA, 24 VDC Aux power 2: 500 mA, 24 VDC (1 A possible if you reduce total available NAC power by 500 mA) Output: 28.3 to 21.9 VDC, special application Note: For a list of compatible devices, see the FX-64 and FX-1000 Series Compatibility List (P/N 3102355-EN) |
|
Loop circuit |
Maximum loop resistance: 66 Ω Maximum loop capacitance: 0.5 µF Communication line voltage: Maximum 20.6 V peak-to-peak Operating current (fully loaded loop) Stand by: 55 mA/45 mA Alarm: 125 mA/115 mA (not including two-wire smoke modules) Circuit current: 0.5 A max. Style 4, 6, and 7 wiring Max. resistance between isolators: Limited only by overall wire run lengths 64 isolators maximum per loop (total both isolator bases and modules) |
|
Batteries |
Type: Sealed lead acid Voltage: 24 VDC Charging current: 2.47 A max. Amp hour capacity: 26 Ah Standby operation: 24 hour or 60 hour Placement: Up to two 10 Ah batteries will fit in the FX-64 control panel cabinet and two 18 Ah batteries will fit in the FX1000 control panel cabinet. If larger batteries are required, use an Kidde battery cabinet. |
|
SA-DACT dialer |
Phone line type: One or two loop-start lines on a public, switched network Phone line connector: RJ-31/38X (C31/38X) Communication formats: Contact ID (SIA DC-05) Operating current Standby/Alarm: 41 mA Max.: 100 mA FCC registration number: GESAL01BSADACT Industry Canada Registration number: 3944A-SADACT Ringer equivalence number: 0.1B |
|
Ground fault impedance | 0 to 5 kΩ | |
Alarm contact | Form C N.O. 24 VDC at 1 A (resistive load) | |
Trouble contact | Form C 24 VDC at 1 A (resistive load) | |
Supervisory contact | Form A N.O. 24 VDC at 1 A (resistive load) | |
Environmental | Temperature: 0 to 49°C (32 to 120°F) Relative humidity: 0 to 93% noncondensing | |
Terminal rating | All terminals rated for 12 to 18 AWG (0.75 to 2.5 mm²) |
Ordering Information
Part | Description |
FX Fire Alarm Systems | |
FX-1000D | Four loop system with one 250-point loop installed, 1,000 point capacity max., includes a two-line dialer, four NACs. Red door, surface mount enclosure. |
FX-1000 | Four loop system with one 250-point loop installed, 1,000 point capacity max. Four NACs, red door, surface mount enclosure. Order dialer separately |
SA-TRIM2 | FX-1000 Flush mount trim, black |
FX-64RD | One loop system with 64-points capacity, includes a two-line dialer, two NACs. Red door, surface mount enclosure |
FX-64R | One loop system with 64-point capacity. Two NACs, red door, surface mount enclosure. Order dialer separately |
SA-TRIM1 | FX-64 Flush mount trim, black |
TVAdministratorsAdministrators