Ceiling Speakers, Speaker-Strobes Genesis GC Series
The Genesis line of ceiling life safety and emergency communications speakers and speaker-strobes combine high performance output with a low profile design to deliver a life safety signal solution that’s as versatile as it is effective. While they are designed to mount inconspicuously overhead, these devices are also rated for wall-mounted applications.
- Clear-lens speaker-strobes are available in high and low candela models, which feature 15 to 95, or 95 to 177 cd output (see ordering information). Ceiling speakers feature ¼ W to 2 W operation, which allows devices to be easily fine-tuned to achieve maximum benefit in exchange for the lowest possible system overhead.
- Light output and wattage tap settings are selectable with conveniently-located switches. Settings remain clearly visible even after final installation, yet they are locked in place to prevent unauthorized movement after installation.
- High fidelity models meet the NPFA 520 Hz requirements for newly construced commercial sleeping areas. They also produce crisp, clear voice audio output that is highly intelligible over large areas.
- These low-profile appliances feature textured housings in architecturally neutral white or eye-catching life safety red. Optional ALERT or FIRE markings make them ideal for applications that require differentiation between life safety and mass notification alerts.
Standard Features
• High Fidelity 520 Hz speaker models available
- Low frequency output meets NFPA standards for newly constructed commercial sleeping areas; increases sound fidelity and audio intelligibility.
• Field configurable – no need to remove the device
– ¼, ½, 1, or 2 watt operation
– 15/30/75/95 cd and 95/115/150/177 cd models available
– Switch settings remain visible even after the unit is installed
• Ideal for Mass Notification applications
– amber lens models available with optional ALERT markings
• Unique low-profile design
– 30 per cent slimmer profile than comparable signals
– Available with white or red housings
• Unparalleled performance
– loud 90 dBA output ensures clear, crisp audio
– Precision strobe timing meets UL synchronization standards
– 25 VRMS and 70 VRMS models available
• Easy to install
– Fits all standard 4-inch square electrical boxes with plenty of room for extra wire
– no extension ring or trim plate needed
– #18 - #12 AWG terminals – ideal for long runs, existing wiring
• Approved for public and private mode applications
– UL 1971-listed as signaling devices for the hearing impaired
– UL 1638-listed as protective visual signaling appliances
– UL 1480-listed as life safety speaker
– UL/ULC listed for ceiling or wall use
Strobe Application
- Genesis strobes are UL 1971 or 1638 listed for indoor use. Prevailing codes require strobes to be used where ambient noise conditions exceed specified levels, where occupants use hearing protection, and in areas of public accommodation. Consult with your Authority Having Jurisdiction for details
- All Genesis strobes exceed UL synchronization requirements (within 10 milliseconds over a two-hour period) when used with a synchronization source. Synchronization for multiple strobe lights in a single field of view is required. See the Specifications table for compatible synchronization sources.
Speaker Application
- The suggested sound pressure level for each signaling zone used with alert or alarm signals is a minimum of 15 dB above the average ambient sound level or 5 dB above the maximum sound level having a duration of at least 60 seconds, whichever is greater. This is measured 5 feet (1.5 m) above the floor.
- Doubling the distance the signal to the ear will theoretically cause a 6 dB reduction in the received sound pressure level. The actual effect depends on the acoustic properties of materials in the space. Doubling the power output of a device (e.g.: a speaker 1 W to 2 W) will increase the sound pressure level by 3 dBA. A 3 dBA difference represents a barely noticeable change in volume.
- Combination audible/visual signals must be installed in accordance with guidelines established for strobes.
Installation and Mounting
- All models are intended for indoor ceiling or wall applications only. Speaker-strobes are mounted to a flush North-American 4" square electrical box, 21 /8" (54 mm) deep.
- Genesis ceiling speakerstrobes simply unlatch and hinge down to open. This gains access to mounting screws and the selectable candela wattage tap switches. The shallow depth of Genesis devices leaves ample room behind the signal for extra wiring. Once installed with the cover in place, no mounting screws are visible
Dimensions
Specifications
Housing | Textured UV stabilized, color impregnated engineered plastic. Exceeds 94V-0 UL flammability rating. Red and white models available. |
Mounting | Flush mount to North American 4-inch square electrical box, 2-1/8 (54 mm) inches deep, or 960A-4RF round flush box. No extension ring required. Suitable for indoor wall or ceiling applications. |
Wire connections | Screw terminals: polarized inputs for speaker, #18 to #12 AWG (0.75 mm² to 2.5 mm²) wire size. |
Operating environment | Indoor only: 32-120° F (0-49° C) ambient temperature; 0-93% relative humidity |
Agency listings and approvals, GC Models | Meets ULC-S541, year 2004 UL requirements for standards UL1638 and UL1971. Complies with UL1480 Fifth Edition. UL/ULC File Number: S2813. FM, MEA, CSFM approved. CSFM File Number: 7320-1657: 0211/0285. Speaker-strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. |
Agency listings and approvals, Low Frequency GCHF Models | UL 464 Listed for low frequency signaling applications. Meets ULC-S541, year 2004 UL requirements for standards UL1638 and UL1971. Complies with UL1480 Fifth Edition. FM, MEA, CSFM pending. Speaker-strobes comply with ADA Code of Federal Regulation Chapter 28 Part 36 Final Rule. |
Supervisory voltage | 30 V max |
Speaker
Operating Voltage | 25 Vrms or 70 Vrms |
Speaker response | 400 to 4,000 Hz |
Output | See table on previous page. |
Strobe
Light output | Field selectable. See table on previous page. |
Operating current | See table on previous page. |
Strobe output rating | UL 1971, UL 1638, ULC S526: selectable 15/30/75/95 cd (VM models) and 95/115/150/177 cd (VMH models) |
Strobe operating voltage | 16 to 33 VDC (24 VDC nominal) or 16 to 33 VFWR (24 VFWR nominal) |
Strobe flash rate |
One flash per second, default. Temporal setting (private mode only): synchronized to temporal output of Genesis audible signals on same circuit. |
Synchronization | Meets or exceeds UL 1971 requirements. Maximum allowed resistance between any two devices is 20 Ohms. Refer to specifications for the synchronization control module, this strobe, and the control panel to determine allowed wire resistance. |
Synchronization Sources | FACPs: VM and VS Series life safety systems, FX Series fire alarm control panels. Moduels: GSA-CC1S, GSA-MCC1S, SIGA-CC2A, GSA-MCC2A, EG1M-RM. Power supplies: MIRBPS6A, MIRBPS10A, APS6A, APS10A. |
Lens | Optical grade polycarbonate. |
Ordering Information
TVAdministratorsAdministrators