30MPa IG100 Inert Gas Fire Extinguishing System
Capacity :80L Extinguishing model:Spray , Agent:IG100 (100% Pressurized Nitrogen) , Work pressure:30MPa , Max Work pressure:36.6MPa , Min. Work pressure:27MPa ,Brand:Xingjin , Certification:CAL, CMA, CNAS, ILAC-MRA, CCC , Model number:QMD30 / 80
Descriptions
- An inert gas fire extinguishing system is a safe, natural way to extinguish a fire. Due to its unique patented valve assembly, entry a protected zone in the industry requires 60 seconds but at a steady flow rate - preventing destructive turbulence occurring. This constant flow rate allows the use of small diameter, low pressure (and less expensive) piping the inert gas container to the nozzle. And, the required vent area is much smaller, which can reduce installation costs by up to 60% on ventilation hardware..
Specifications
| STT | Descripsion | Specifications |
| 1 | Pressure | 30MPa |
| 2 | Model | QMD30 / 80 |
| 3 | Capacity | 80Ltr |
| 4 | Air intake capacity | 24,68kg |
| 5 | Diameter | Φ267mm |
| 6 | Height | 1910mm |
| 7 |
Activation time |
≤120 second |
| 8 | Fill rate | 0,309kg / L |
| 9 | Trigger voltage | DC24V / 1.6A |
| 10 | Equipment nitrogen pressure | 6,0 ± 1,0MPa (20 ℃) |
| 11 | Storage room temperature | 0 ~ 50 ℃ |
| 12 | Maximum pressure | 36,6MPa |
| 13 | Minimum suaasrt pressure | 27MPa |
The components
- Storage cylinder group, storage cylinder group frame, nitrogen actuator, nitrogen actuator bracket, cylinder valve, liquid flow check valve, gas flow check valve, electric starter magnetic, gas pipeline, manifold, selection valve, three-link, reducer rod, reducing elbow, flange, safety valve, pressure transmitter, pipeline, nozzle, chemical, fire detector , fire controller, sound and light alarm, alarm bell, gas light, emergency start/stop button, etc.
Application
- The following are typical hazards covered by the INERGEN system:
- Computer room
- Sub-floor
- Tape storage
- Telecommunications / Switchgear
- Vault
- Processing equipment
- All commonly occupied or uninhabited areas where electronic equipment is sensitive or irreplaceable
Advantage
- Compared with the traditional 15MPa system, the number of extinguishers can be saved 25% -50%.
- The construction area between the pillars is effectively reduced, while improving the occupancy rate and overall use of the building.
- 6MPa continuous low pressure release can reduce the cost of pipes and pipe fittings.
- 6MPa continuous release pressure provides more effective and lasting pressure, and the transmission distance can reach 200 meters.
- The release of the entire system with low pressure can only have less impact on site personnel, equipment and building structures and more safety.
- The external constant pressure reducer can only bear the pressure when the system is spraying, which is convenient for disassembly and maintenance, and effectively reduces the failure rate of the system.
- After injection, the system does not need to replace any parts, simple disassembly and secondary filling, the system can be quickly put operation.
- The open area of the pressure reducing device is reduced. The input cost of the pressure reducing device is directly reduced, and the safety lock is simpler to install and arrange.
- Nitrogen Fire Extinguishing System (IG-100) can be widely used for quick response to fire, protection of personnel on construction site, unexpected fire, critical places sensitive to chemical reactions and effectively protect the safety of people and property.
System Diagram
.png "Hệ thống chữa cháy khí trơ 30MPa IG100")
.png "Hệ thống chữa cháy khí trơ 30MPa IG100")
You can refer to similar products..HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about 30MPa IG100 Inert Gas Fire Extinguishing System
TVAdministratorsAdministrators