Wireless Addressable Smoke Detector AW-D603L
The wireless addressable smoke detector is mainly designed to be use with a wireless control system. The detector is a photo-detector that uses the most advanced optical sensing chamber. It has a wire...
The Wireless Addressable Smoke Detector AW-D603L is mainly designed to be use with a wireless control system. The detector is a photo-detector that uses the most advanced optical sensing chamber. It has a wireless network alarm function that can form a wireless LAN alarm system through the panel. It is wireless connection and supports electronic coding, easy installation and construction.
Wireless Addressable Smoke Detector AW-D603L
2. Product Features Wireless Addressable Smoke Detector AW-D603L
2.1 Surface mounting
2.2 LED indicator and buzzer
2.3 No wire connection (easy to install)
2.4 Full electronic coding, through AW-FR100 encoder scene rewrite
2.5 Compatible with all the latest EN standards
3. Technical Parameters Wireless Addressable Smoke Detector AW-D603L
3.1 Operating voltage: 3VDC (with battery CR17450 / CR17455)
3.2 Operating current: monitoring status≤8uA, alarm status≤120mA
3.3 Operating Frequency:433MHz (418MHz to 448MHz)
3.4 Smoke Alarm Sensitivity: 0.18-0.3dBM
3.5 Wireless transmit power: +20dB
3.6 The battery is used for ten years, and it does not need to be replaced for ten years of normal operation.
3.7 Battery Type: A Panasonic Corporation（Panasoic Energy Co.,Ltd)-CR17450/CR-AGF;B Huzhou Huiderui Litium Battery Technology. Co,. Ltd)-CR17450.
3.8 Alarm SPL: ≥85dB /3m
3.9 Operating temperature: 0℃～40℃，Relative humidity: ≤93% (non-condensing)
3.10 Protection class: IP30
3.11 Application: For indoor use only
3.12 Encoding: Coded by the encoder, the address range 1 to 250 optional
3.13 Materials and colors: ABS, white
3.14 Size: 105mm105mm41mm
3.15 Weight: about 120g
3.16 Mating Panel: AW-FP100 addressable fire alarm control panel
4. Mounting Base Wireless Addressable Smoke Detector AW-D603L
AW-D603L should comply with all local codes. Shown in Figure 2, install the base of the AW-D603L on the wall.
And then the main body the base.
The base dimensions of 105mm105mm41mm (LengthWidthHeight), mounting hole diameter φ2mm, fixing the hole spacing is 42mm, shown in Figure 3.
5. Operation Wireless Addressable Smoke Detector AW-D603L
Address coding: The address of AW-D603L, you can use the handheld encoder (AW-PF100) and the wireless
connector to edit/read and write the address wirelessly. Test: When there is no fire alarm, you can press the test button to test. When pressed, both the buzzer and the LED
light will work intermittently (beep and LED blinking). Buzzer silence: When the detector is under alarm condition, press the button on the cover to silence the buzzer. Reset: When the detector is under alarm condition, and the fire alarm is disappeared, press the reset button on the panel to reset the detector. Normal work: The LED flashes every 1 minute, and the smoke density is detected every 5 seconds, and the buzzer does not sound. Low battery/fault: The LED flashes every 1 minute and the buzzer will sound once. Smoke sensor failure: every two LED flashes, only the buzzer sounds
.png "Wireless Addressable Smoke Detector AW-D603L")
.png "Wireless Addressable Smoke Detector AW-D603L")
Please see also AV lice press equipment TẠI ĐÂY
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Wireless Addressable Smoke Detector AW-D603L
TVAdministratorsAdministrators