Unipos VIT60 combination wireless fire detector
The Unipos VIT60 combination wireless fire detector provides a reliable early warning of a fire condition, responding to a fixed threshold smoke concentration or temperature rise rate or fixed temperature threshold detected in protected base.
PRODUCT DESCRIPTION
Fire detectors provide a reliable early warning of a fire condition, responding to either fixed threshold smoke concentrations or temperature rise rates or fixed temperature thresholds detected in protected facilities. It combines the advantages of type VIT30 and type VIT20 and is an attractive choice due to reduced cost of supply and installation. The temperature class (A1R, A2R) and smoke sensitivity (low, medium or high) are programmed by the fire control panel VIT01 and they conform to European standards EN54-5 and EN54-7.
The principal operation of its thermistor is based on the change in ohmic resistance in the thermistor as a result of the change in ambient temperature.
The principal, of optical chamber operation, is based on the dispersion of infrared rays smoke particles, which are trapped in the optical chamber.
Specifications
Supply voltage: (3.2-3.6) V DC
Power supply Backup: (3.0-3.2) V DC
Current Consumption When Transmit: 45 mA
Current Consumption When Receiving: 55 mA
Average Consumption in Duty Mode: 80–A Response time: 30 seconds.
Temperature class: P - A1R or A2R programmable EN54-5: 2000 Sensitivity: medium (middle) or more than 20% (high) according to EN 54-7 or less than 20% (low) Protected area: circles up to 8 m . in diameter Installation height: up to 3.5 m (according to EN54) Protection level: IP40 Operating temperature range: minus 10® up to 55®C
Relative humidity resistance (no condensation): 95%
Overall dimensions, including base: 100 mm , h 52 mm
Weight (including base and battery): 0.125 kg
You can refer to products genuine fire alarm equipment...HERE
Have 0 comment, evaluate about Unipos VIT60 combination wireless fire detector
TVAdministratorsAdministrators