UL Standard Deluge Anen Valve
Deluge Anen Valve fitted on the foam fire extinguishing device of a fixed wet line forms several foam heads and sprinklers In the event of a fire, the deluge valve starts working due to pressure changes Pressure due to sprinkler breakage senses This then sends the foam-water mixture to all emitting areas. The product has been approved according to UL standards.
User location:
Apply to sprinkler, mist and open foam system controllers. In the event of a fire, the deluge valve can be actuated by an electronic solenoid valve, disrupting the sensed nozzle, or manually pushing in the emitter area to start the deluge valve. It can cooperate with alarm valve and telematics signal to better understand the fire location.
Installation and maintenance instructions:
1. Manually start after installation. Turn on the water supply slowly. To avoid pressure loss, make sure there is no air in the pipeline.
2. When the flow is steady, turn the switch until the water comes out.
3. By equipping the pressure gauge, it is easier to check and maintain the equipment.
Specifications
UL Standard Deluge Anen Valve | |
Size | 2 'PT |
Type | Horizontal |
Maximum working pressure | 14 kgf / cm2 |
Test pressure | 25 kgf / cm2 |
Working pressure range | 1,5 ~ 14 kgf / cm2 |
Loss pressure tube length | 14,9 m (48,9 ft) |
Weight | 8,5 kg |
Have 0 comment, evaluate about UL Standard Deluge Anen Valve
TVAdministratorsAdministrators