System Chemori 227, HFC 227ea Clean Agent
Chemori is pleased to introduce our Clean Agent Chemori 227, a trademark of HFC-227ea, Heptafluoropropane.Chemori 227
® is Underwriter’s Laboratories (UL) Listed Approved Clean Agent Fire Suppression product. Its characteristics are the following:
Description
1. Colorless
2. Odorless
3. Safe for people
4. Electronically nonconductive
5. Non corrosive
5. Free of residue
.png "System Chemori 227, HFC 227ea Clean Agent")
Chemori 227® is a safe and effective “clean” fire suppression agent used in applications requiring total flooding of protected spaces with no clean up required following its use.
Chemori 227® does not contain chlorine nor bromine and has zero ozone depletion potential (ODP). It is not subject to any phase out schedule and carries no current or proposed regulations for fire protection use under the Montreal Protocol, Kyoto Protocol or F-Gas Regulations.
Chemori 227® is our brand of HFC-227ea and complies fully with the standards of ASTM 06064 and NFPA 2001 and has achieved a minimum purity of 99.95% and less than 10ppm of moisture. It has less than 1ppm acidity as HF. The non-volatile residue is less than 0.05g/100ml.
All safety requirements are provided in Chemori 227® Material Safety Data Sheet, MSDS number CHEM-00227.
.png "System Chemori 227, HFC 227ea Clean Agent")
Engineered System
The Engineered concept of Chemori 227® Clean Agent Fire Suppression System allows a range of flexibility in its design parameters. Each application requires an individual flow calculation to determine the quantity of Chemori 227® required for a specific hazard volume and its set of pipes and fittings sizes. The area coverage of each nozzle can be calculated using the Chemori Flow Calculation Software version CR 4.0. Chemori Engineered System has various sizes of the Chemori 227® cylinder ranging 20 lb, 35 lb, 70 lb, 100 lb, 150 lb, 250 lb, 375 lb, 560 lb, and 1200 lb. These cylinders are super-pressurized with nitrogen to 360 psig at 70 °F and have the operating temperature ranging 32 °F to 130 °F. Each cylinder is equipped with a suitable back pressure valve. The cylinders are manufactured, tested, and stamped in accordance with DOT 4BW500 or DOT 4BA500. The systems are designed for Total Flooding Protection against Class A, Class B and Class C fires occurring within an enclosure. The Chemori Engineered System is designed and installed in accordance with NFPA 2001 and to comply with the Chemori's Installation, Maintenance and Services Technical Manual (P/N: CR-90225-D).
.png "System Chemori 227, HFC 227ea Clean Agent")
Pre-Engineered
Chemori Pre-Engineered Unit is a clean agent system of the Chemori 227® pre-set quantities. It has specific flow rates in a set of pipes, fittings, and nozzles for various hazards. Specifically, they are limited to the types and sizes by Underwriters Laboratories based on the actual fire test conducted. Chemori provides the Pre-Engineered Units ranging 3 lb, 6 lb, 12 lb, and 18 lb that are super-pressurized to 240 psig at 70 °F. The larger models are 35 lb, 70 lb, 140 lb, 240 lb, 360 lb and 520 lb in which the units are super-pressurized to 360 psig at 70 °F. Each cylinder is equipped with a suitable cylinder valve. All these units are designed for Total Flooding Protection against Class A, Class B and Class C fires occurring within an enclosure. The Chemori Pre-Engineered System is designed and installed in accordance with Chemori’s Installation, Maintenance, and Services Technical Manual (P/N: CR-LP-SYS1-D).
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about System Chemori 227, HFC 227ea Clean Agent
TVAdministratorsAdministrators