Lighnting protection devices for DC power ATVOLT

Lighnting protection devices for DC power ATVOLT

Manufacture: Lighnting

DC ATVOLT. is equipment, household electric lightning protection device, price of lightning protection device, Panasonic surge arrester, lightning protection devices, what is lightning protection device, installation of lightning protection equipment, equipment parameters surge arrester,Surge arrester requirements

Product information

Product line of lightning protection devices for DC power ATVOLT

AT-8505: ATVOLT 5 : 5VDC power protection

AT-8512: ATVOLT 12: 12VDC power protection
AT-8515: ATVOLT 15: 15VDC power protection
AT-8524: ATVOLT 24: 24VDC power protection
AT-8530: ATVOLT 30: 30VDC power protection
AT-8548: ATVOLT 48: 48VDC power protection
AT-8560: ATVOLT 60: 60VDC power protection
AT-8580: ATVOLT 80: 80VDC power protection
AT-8510: ATVOLT 110: 110VDC power protection

ATVOLT lightning protection secondary transmission lightning strikes and industrial overvoltage on the line, they react immediately to the overvoltage in several nanoseconds, suppressing these electrical impulses to very low to protect the sensitive electrical equipment is conected.

Lightning protection for DC power supplies ALVOLT is designed to protect lines. Each protection device for 2 wires connected in series.

Features of lighnting protection devices for DC power ATVOLT

- Recommended to protect both ground wire (CM) and wire - wire (DM)

- Tested and certified for type 3 protection devices in accordance with EN 61643-11 and GUIDE-BT-23 REBT. Suitable for types I, II, III and IV according to ITC-BT-23 REBT.

The DC ATVOLT lightning arresters can be checked for service status by the AT-3501 surge protector: When the radio transmitter is applied, if the ATVOLT is good, the LED will light bright. If the ATVOLT fails then the LED will not glow.

- There are many lightning protection devices for DC power sources with different working voltages.

Plug-in modules are easy to replace in case of damage without having to disconnect the wires. When replacing the module does not disrupt the line. Grounding is done through a sheet metal surface mounted DIN stick.

- It does not work under normal conditions, does not affect the normal operation of the line and there is no leakage current.

- Low voltage residuals at all operating voltages.

- Response time is very fast.

- The mechanical connection of the wires by screwing, which allows to withstand the highest voltage.

ATVOLT has been tested in independent testing laboratories, the characteristics received are in compliance with the relevant standards.

Earthing: All electrical equipment and lightning protection equipment must be grounded, grounding systems must be leveled together by direct connection or through equipotential bonding.

Grounding must be less than 10 ohms when measured with professional earth resistance meters. Installation of ATVOLT lightning protection equipment

Installation and connection of lighnting protection devices for DC power ATVOLT

The ATVOLT is connected in series with the DC power line, when the cable is cut and the positive and negative terminals are connected to the corresponding terminals, this is very important, since incorrect connections can cause short circuits to the power supply. On the other hand, it is necessary to properly connect the input and output terminals. Otherwise protection elements will not work.

ATVOLT modules are mounted as close as possible to the object to be protected.

Xem thêm

Tags: Lighnting protection devices for DC power ATVOLT

Frequently asked questions

We need advice on the price of this product

You will receive a quote from us as soon as possible..