IRIS SIMPO Redundant Addressable Network Module,Teletek Fire Alarm
IRIS / SIMPO Redundancy Network Module is a module used to build an Ethernet network between Teletek Electronics IRIS, IRIS PRO and SIMPO address boards,The modules allow connection of up to 32 panels fire in the network and ensure a redundant connection of communication between the boards ,Communication via RS 485 protocol. The maximum distance between two Redundant network modules is 1000 m ,Operation with Modules IRIS/SIMPO redundant network modules are supported for the following console revisions:
For IRIS fire alarm panel:
- LCD PCB hardware modification: 2.4 and higher
- Main board firmware revision: 4.2 or later
For SIMPO fire alarm control panel:
- Board's main firmware revision: 2.8 and higher
Maximum fire alarm panel in the network - 32
Communication
- RS485
Ensure a Redundant connection of communication between the boards.
Interface connection between control panel and module (plugs the console)
Maximum distance between two Redundant network modules - 1000 m.
Programming the control panel
Power supply control panel
Cable connection:
Twisted pair
Length - max. 1000m (between two modules)
Cross section - 0.5 - 2.5mm²
- Operation mode: - Normal
- Flashing LED
- Trouble
- LED lights up
- LED indicator: - LED1 - Output communication LED 2 - Panel communication LED- Module 3 - Input communication
Please see similar products….HERE
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about IRIS SIMPO Redundant Addressable Network Module,Teletek Fire Alarm
TVAdministratorsAdministrators