INSTRUCTIONS FOR USE OF HOCHIKI HCV ,SERIES CENTRAL FIRE ALARM

09/01/2023

Hochiki HCV - SERIES fire alarm cabinet ⭐ ✅ latest Hochiki cabinet user manual ⭐ ✅ contact pcccdongnam.vn

Fire alarm system is automatically installed in 24/24. In normal operating state, the Power on light is on. If there is a fire incident, the alarm will sound and the center will display the corresponding fire incident area based on the Zones.

HƯỚNG DẪN SỮ DỤNG TỦ BÁO CHÁY TRUNG TÂM HOCHIKI HCV- SERIES

Central fire alarm control cabinet HOCHIKI HCV-8

I.Meaning Of The Center Line Of Indicator Lights

- Fire: The red light is on when a fire occurs.

- Power on: The green light is on to indicate that there is a power supply.

- Delay on : Late notification. - Test mode on: Test mode.

- General disablements: Enable or disable a certain function of the system.

- Power fault: Bright yellow light indicates AC power failure.

- Sounder/disablements: Turn on or off a certain function of the alarm.

- General fault/disablement: Error or failure of a function of the system.

- System Fault: System error.

- Alarm/fault waning silenced: Turn off the alarm.

II.Function Description Of Buttons: Silent/sound alarm: Turn the alarm on or off immediately. You must check the Enable control key and turn it clockwise to use this function. Alarm/fault warning silence: Turn off the alarm when there is an alarm. You must check the Enable control key and turn it clockwise to use this function. Reset: Reset the system to the normal operating state. You must check the Enable control key and turn it clockwise to reset it. Lamp test: Check the indicator lights.

Mode 10+: Enter data in programming mode.

Mode 1+: Input data in programming mode.

III. Alarm Procedure: When there is a fire incident, the fire alarm light in the fire zone (zone) will light up and the alarm will sound. To turn off the alarm, you have to find the Enable control key and turn it clockwise and then press the Alarm/fault warning silence button. To turn on the alarm immediately, you must find the Enable control key and turn it clockwise and then press the Silent/sound alarm button. After the center has an alarm, it is necessary to Reset for the system to work normally, check the Enable control key and turn it clockwise and then press the Reset button. When reset is complete, turn the lock back.

You can contact 0917.911.114 so that we can serve you well!

Have 0 comment, evaluate about INSTRUCTIONS FOR USE OF HOCHIKI HCV ,SERIES CENTRAL FIRE ALARM

TVAdministratorsAdministrators

Welcome, honored guests. Please leave a comment, we will respond soon

Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.13299 sec| 3679.539 kb