INLINE FOAM INDUCTOR HD187

Manufacture: HD Fire Protect PVT. LTD.
Product code: HD187

Inline Foam Inductor is used to induct the foam liquid concentrate in water stream to supply proportioned solution of the liquid concentrate and water, to the foam producing equipment. The inductors are designed primarily for use in the fixed foam installation to provide a simple and reliable method of proportioning in constant flow applications. Each Inductor is designed for a pre-determined water pressure to give the correct proportioning at that pressure and discharge rate. The increase or decrease of the inlet pressure will result in an increase or decrease in the flow rate, which in turn will change the proportioning.

Zalo

Consulting hotline: 0944934114
Product information

TECHNICAL DATA: INLINE FOAM INDUCTOR HD187

MODEL IG - Bronze material
IS - Stainless Steel material
OPERATING
PRESSURE
6.5 to 12 BAR (93 - 175 PSI)
FACTORY 
HYDROSTATIC
TEST PRESSURE
25 BAR (365 PSI)
INDUCTION  3 or 6%
MAXIMUM BACK
PRESSURE
 65% of Inlet Pressure
NOMINAL SIZE 65, 80, 100 &150 MM
FINISH Red RAL 3000
ODERING INFORMATION  1) Inductor Inlet Pressure
INFORMATION 2) Foam solution flow required
3) Percentage of induction
4) Type of foam concentrate
to be used
5) Maximum suction lift
6) Flange connection

SPECIFICATION INLINE FOAM INDUCTOR HD187
Inductors are available in three different materials of construction, a wide range of flow 75 to 3500 litres per minute at inlet pressure between 6.4 to 12 bar as shown in the graph. Each Inductor is accurately calibrated at the factory to match the flow, pressure and the induction requirement of the system. This enables to ensure and achieve the correct performance.

APPLICATION INLINE FOAM INDUCTOR HD187
Inline Foam Inductors are quite suitable for application utilizing single fixed discharge device. The Inline Inductors are not suitable for variable flow or pressure applications. The Inline Inductors are not suitable for Sprinkler system or system utilizing multiple small orifice discharge devices, which may result in increased back pressure due to blockage of discharge device.

You can refer to products genuine fire alarm equipment...HERE

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about INLINE FOAM INDUCTOR HD187

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.13783 sec| 4319.094 kb