FOC Z728, 1-channel Detnov Isolation Module

Manufacture: detnov
Product code: FOC Z728

1 channel Zener is essentially a safety barrier
✔️Dimensions: 110 x 115 x 12.5 mm , Detnov Spain fire alarm

Zalo

Consulting hotline: 0944934114
Product information

DESCRIBE

• Safety internal barrier, powered by zones and with Zener diodes for use in conventional fire detection systems to protect hazardous areas.

• Each zone contains two stages of pulse-tested Zener diodes or forward connections and an 'easy' termination resistor. At In the event of a power failure in a safe area, voltage limiting diodes can reach the hazardous area and current limiting resistors. Fuses protect the diodes and two voltage limiter stages ensure continued safety in the event of any stage failure. No circuit may use active output current limiter

• Note: Note that the unit ground connections are made via a DIN rail connection (this product MUST be grounded).

CHARACTERISTICS

• 1 channel

• DC version, positive polarity

• Color-coded mobile terminals

• Accommodates conductors up to 2.5mm²

• The input circuit is protected against reverse polarity

• DIN rail mounting

• ATEX II classification

SPECIFICATION

• Number of channels: 1

• Maximum series resistance 327Ω

• Maximum operating voltage 26.9V DC, 26.5V DC at 10 A

• Short circuit current up to 93 mA

• Fuse rating (continuous) 50 mA

• Storage temperature 25°C ~ +70°C

• Operating temperature 20°C ~ +60°C (continuous working)

• Relative humidity up to 95% non-condensing

• Dimensions: 110 x 115 x 12.5 mm

• Weight: 150 g

Please see similar products….HERE       

Xem thêm
Rút gọn
Frequently asked questions

You will receive a quote from us as soon as possible..

Have 0 comment, evaluate about FOC Z728, 1-channel Detnov Isolation Module

Welcome, honored guests. Please leave a comment, we will respond soon
Reply.
Sender information
Comment
Click here to rate
Sender information
Product portfolio
Online support
0.15161 sec| 4309.773 kb