Fire Hose Reel D50 D65 Yamato Japan
Tokyo Yamato D50 and D65 fire hose reel
1. Technical specifications of the Fire Hose Reel D50 D65 Yamato Japan
| Manufacturer | Yamato |
| Origin | Japan |
| Lenght | 20m |
| Diameter | 50-65mm |
| Operating pressure | 22.5bar |
2. Using Fire Hose Reel D50 D65 Yamato Japan
Step 1: Quickly bring the coil the box.
Step 2: Spread the coil, the nozzle the hose of the fire wire.
Step 3: Pull the firewire coil, so that the coils are not folded. Put the head of the other fire wire to the fitting of the fire brigade.
Step 3: After the installation, one person to the front of the pump head, holding the handle firmly with two hands, the faucet tied to the nearest point, the tip of the cock slightly up towards the fire.
Step 5: Run the water pump for fire extinguishment as follows:
- Open the fuel valve, open the switch, open the small station.
- Press the button until the engine starts, if you need to pull e (in the case of weak battery), then shake the machine by hand.
- If normal detonation, pull gas ½, pull the pump when the pump water, pay to pull the pump to normal position, test the water well to protect the machine.
Note: In the process of using a tattoo, there must always be a second person supporting the hose holder.
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Fire Hose Reel D50 D65 Yamato Japan
TVAdministratorsAdministrators