Specifications
- Battery: at least DC24V 4Ah
- Power: 1 ~ 8 rounds
- Input power: AC220V, 50 Hz
main function
- The FMS-R addressable fire alarm control panel contains 1 to 8 SLC loops with each ring supporting 300 devices of any combination (sensors or modules). Communication between devices is carried over a standard cable, requiring no shielded or twisted pair. The control panel can easily configure the common detection system, such as thermal, photo and ion sensors, call points, alarms, etc. using the FR-G monitoring/control module . In addition, the RS-485 bus provides communication with the control panel network, while the RS-232 interface allows convenient programming via PC.
Featured
> DCP protocol for fast and strong communication
> One, expandable to eight, Signal Circuit (SCL) loop
> Class B (model 4) and Class A (model 6 or 7) support loops SLC loop
> 8 amp power supply with 8 onboard Class B NAC circuits
> Uses standard cable, no shielded or twisted pair required on SLC loop
> Up to 300 sensors and modules per loop
> Communication distance between devices can be achieved 1.2km by using 14 . AWG wire
> Large LCD 15 lines x 40 characters
> Self-test function to support the same address problem in several devices
> Fire drill test and walk test function
> RS-485 bus for panel network
> 2 built-in RS-232 interfaces for programming via PC interface and serial printer
> History log can reach 3000 events
You can refer to products genuine fire alarm equipment...HERE
Have 0 comment, evaluate about Fire alarm center address 1-8 loop formosa FMS-R
TVAdministratorsAdministrators