Fire alarm cabinet unipos FS 4000, Fire fighting equipment HCM
unipos fire alarm catalog
⭐unipos pccc equipment , unipos vietnam agent , address hochiki fire alarm , notifier fire alarm catalog , supply genuine unipos fire alarm equipment , contact 0917911114
The fire control panel FS4000 (2/4/6/8 channels) is designed to work with conventional automatic fire detectors and manual call points. The control panel has outputs provided to external operating devices.
PRODUCT DESCRIPTION
The fire control panel FS4000 is designed to work with conventional automatic fire detectors and manual call points. The control panel has outputs provided to external operating devices.
The device is produced in four versions: 2 lines of fire alarm
- FS4000 / 2 4 lines of fire alarm
- FS4000 / 4 6 lines of fire alarm
- FS4000 / 6 8 lines of fire alarm
- FS4000 / 8
Specifications Fire alarm lines:
- Maximum number of fire detectors in one line: 32
- Connection line: two wires
- Maximum resistance of a line: 100 Current threshold for:
- Error condition: 0 - 6 mA
- Working mode: 6 - 16 mA
- Fire condition: 16 - 80 mA
- Short circuit: > 80 mA Monitored output under fire conditions:
- Quantity: 2 pieces
- Type: potential, relay with independent control
- Electrical characteristics: (19-27.5) V DC / 1A Relay output for fire condition:
- Quantity: 2 pieces - Type: no potential, 1 switch, 1 NO
- Electrical characteristics: 3 wires / 125V AC, 3A / 30V DC Relay output for fault condition:
- Quantity: 1 piece - Type: no potential, switched
- Electrical characteristics: 3 wires / 125V AC, 3A / 30V DC Relay output for fault condition:
- Number: 1 pcs
- Type: unattended type activated on short circuit (potential free contact)
- Electrical characteristics: 5 VDC in normally open / 0 VDC in trigger mode Efficiency:
- Fire alarm line control and controllable output for fault conditions (short circuit and interruption) and auto reset. -
Detect removed fire detector and reset automatically.
- Define manual call points.
- LEDs for alarm and emergency status.
- Delay output for a fire condition with an interval of 1, 2, 3, 4, 5, 6 or 7 minutes after the fire condition is registered.
- Option to make 'TRADE AND' two fire alarm lines.
- Duty Mode Condition with direct trigger Stage 2 Fire Condition for two lines of fire alarms.
- Indicates the status of the device for RS485 data transmission.
- Option to enable/disable RS485 communication.
- Built-in sound for fire conditions - single tone, continuous, can be muted.
- Built-in audio for fault condition - single tone, intermittent, can be muted.
- Test mode for fire alarm lines.
- Disable fire alarm lines.
- Disable output for fire condition.
- Expand options with additional relay outputs for individual line fire conditions and built-in RS485 for local area network operation. - Input for remote fire reset operation; Indicator of registered events:
- Indicator light: LED
- Sound: Built-in buzzer Electricity supply:
- Voltage: (100-240) V AC
- Frequency: 50/60 Hz Battery backup:
- Battery type: lead, gel electrolyte
- Number of batteries: 2 pieces
- Nominal voltage of backup battery: 12V
- Nominal capacity C20: (7.0) Ah
- Charging voltage: DC 28V
Operation in Duty mode with interruption in mains power: Line - 24 V / 1.2ah - 24 V / 4.5ah - 24 V / 7.0ah 2 lines - 32 h - 120 h - 180 h 4 lines - 24 h - 98 h - 140 h 6 lines - 20 h - 80 h - 110 h 8 lines - 16 h - 68 h - 90 h Consumption for backup battery supply: - Configuration of 2 lines: <35 mA at 24V DC - Configuration of 4 lines: <45 mA at 24V DC - Configuration of 6 lines: <55 mA at 24V DC - Configuration of 8 lines: <65 mA at 24 V DC Powering external devices: - Voltage: (19-27) V DC - Maximum current value (including line of contr.outputs): 1.2A Fuse:
- Main source 230V: 4.0 A - Backup battery: 6.0 A - Power supply for external devices: 1.85 A automatically Monitored output: 1.1 A auto Dimensions: 304mm x 222mm x 94mm Weight (excluding backup battery): 0.98 kg Download: User Manual v.3 User Manual v.3 CHILD User Manual v.11 Brochure FS 4000/2/4/6/8 FD 4201 . Module The FD 4201 module expands the options of the FS4000 fire control panel. It allows: - Connect the fire control panel FS4000 in the system of the repeater FS5200R and/or several remote fire control panels FS4000, FS5100, FS5200, FS5200E; - Command the fire control panel the repeater in the remote fire control panel network
- Control relay output for each line under Fire condition. The module can only work with the latest version of fire control panel FS4000 (fire control panel with serial number after 4000). It is produced in 4 variants corresponding to the nomenclature of the manufactured fire control panel FS4000, with 2, 4, 6 or 8 lines, corresponding to relay outputs 2, 4, 6 or 8. The RS485 interface is an integral part of the module and it is offered in all variants. This module includes:
- RS485 interface for connection to the FS5200R repeater;
- Potential free relay for fire condition (one to line by line of fire control panel FS4000). Communication between the fire control panel and the FD 4201 expansion module is done via ribbon cables, connecting the fire control panel and the unit. The module is the power supply along the ribbon cable.
Specifications Relay output for fire condition
- Type: potential free, switching
- Power supply: 3A / 125VAC; 3 / 30VDC RS485 . interface
- Network address: fixed
- coincides with the fire control panel's serial number
- Data exchange rate: fixed - 9600 bit/s.
Operating temperature range: -5®С to 40®С
Relative humidity: up to 93% at 40®
Size: 180 65 25 mm
Weight: 0.160 kg
You will receive a quote from us as soon as possible..
Related products
Have 0 comment, evaluate about Fire alarm cabinet unipos FS 4000, Fire fighting equipment HCM
TVAdministratorsAdministrators